valve adjustament
May-18th-2003, 05:17 PM
#1
Protege Newbie
Thread Starter
Join Date: May 2003
Posts: 28
valve adjustament
is it necessary to do a valva adjustment after installing the MS/JDM cams? the have the same lift as stock, only the duration is different so I am guessing the valves should be ok, right or not?
May-18th-2003, 11:21 PM
#2
Registered User
Join Date: Jan 2002
Location: Dallas, Texas
Posts: 1,122
Yes, you should check your valve clearances.
The FS-ZE intake and Mazdaspeed exhaust cams are ground to the same base diameter as the stock cams, and I have yet to hear of anyone having a valve clearance problem after installing them. However, IMHO you should check the valves anyways, just to be safe.
The FS-ZE intake and Mazdaspeed exhaust cams are ground to the same base diameter as the stock cams, and I have yet to hear of anyone having a valve clearance problem after installing them. However, IMHO you should check the valves anyways, just to be safe.
Thread
Thread Starter
Forum
Replies
Last Post
ProtegeES
3rd gen Engine/Drivetrain
7
July-21st-2002 09:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)