Is my transmission dead?!?
#1
Is my transmission dead?!?
Ok, so here is the story: I was making a left turn, and I let the clutch out too early and ground it going into second. Pushed the clutch in and second went in smoothly. Now I have no first gear. The shifter will not go into first at all, it goes into the slot, but won't engage. Let me put it this way, when you go into first, you feel the slight pressure before it "clunks" into first, well, you feel the pressure but it will not go past halfway into first.
Any ideas?
Any ideas?
#4
Sounds more like a fork to me...
While you are in there - inspect/replace synchros & clutch too. Maybe now is the time for that new lightened pressure plate too.... Or just replace with an MSP unit? HHHhhmmmh.
While you are in there - inspect/replace synchros & clutch too. Maybe now is the time for that new lightened pressure plate too.... Or just replace with an MSP unit? HHHhhmmmh.
#5
Yeah, I am going to go ahead and get a new/better clutch and a lightweight flywheel. Might as well since it is all off, right?
well, news: it engages in first now, but only some times. bliping the throttle, releasing the clutch in neutral, and/or changing gears with the clutch in will not help if it will not enter first. other than that, its fine. also seem to have a horrible makarana noise... like if i ground hte teeth completely off the gear and they are rattling when i hit the brakes hard..
well, news: it engages in first now, but only some times. bliping the throttle, releasing the clutch in neutral, and/or changing gears with the clutch in will not help if it will not enter first. other than that, its fine. also seem to have a horrible makarana noise... like if i ground hte teeth completely off the gear and they are rattling when i hit the brakes hard..
#7
Originally Posted by Da P-Funk!
I dunno - sounds like like clutch when you say this... Either way - remove/inspect/replace as required.
#9
Originally Posted by AxelaSpeed3
your gonna have to drop the tranny might as well get a new clutch now..re-align everything and your puch rod sounds like its out of sync drop tranny and check it out
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)