GEN 3 Pistons Upgrade
November-15th-2002, 03:00 AM
#1
Registered User
Thread Starter
Join Date: Nov 2002
Location: NM
Posts: 30
GEN 3 Pistons Upgrade
Im new to upgrading engine internals and was wondering what kind of boost in HP
new higher compression pistons would produce, i found that my 2002 has 9.1 to1,
and the ones i found were 10.7 to 1. Also if i put in the pistons would i need to
upgrade anything else while im in there?
eg. intake and exhaust cams?
new higher compression pistons would produce, i found that my 2002 has 9.1 to1,
and the ones i found were 10.7 to 1. Also if i put in the pistons would i need to
upgrade anything else while im in there?
eg. intake and exhaust cams?
November-19th-2002, 02:27 AM
#2
Banned
Join Date: Nov 2001
Location: Silicon Valley, CA. 95110
Posts: 632
Your primary obstacle will be fuel and ignition mapping. That's where you need to start with the dilemna. If you can find a feesable way to set these parameters than I believe you should be fine with the upgrade itself along with the cams, both intake and exhaust.
Rishie
Rishie
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)