stef_nz

Hi everyone. Long time no see.

Anyhoo, I'm trying to wire in my avc-r and I've found all the pins except the speed sensor one (you can't use the wires going to the gauge cluster, the signals are all screwed up, I need the ecu inputs). Can anyone help me out please?

It's a 95 BH, BP1.8l.


*********************** EDIT **************************
Okay, so I finally found it.

Here is the breakdown for anyone interested in finding these pins in the future.....
NOTE: Wire Colours may differ between vehicles BUT THE PINS WILL REMAIN THE SAME FOR ALL 2nd Gen 1.8l BPs - open up your ecu to find the pin numbers...

Key on Power - Pin: 4B - Color: White/red
Ground - Pin 4A (I think also 4C and 4D but I used 4A) - Color: Black/green (4C Black/orange and 4D Black/yellow)
Vehicle Speed Sensor (VSS - the tricky one!) - Pin: M - Color: Green/red
RPM/Tach - Pin: 4F - Color: Purple/green
Throttle (TPS) - Pin: 3F - Color: Blue/yellow

There you go folks!