Lay Low

Ok I have A 94 323 auto Tranny, and i have I problem with the seatbelts. When I start up the car the seatbelts that move long the track don't work, I have to hook the belt manually are there any solutions to get this workin,I checked all the fuses and there all good,but didnt see one for seatbelts, is there something under the hood that would have anything to do with this,much help needed

Thanks Guys

fst323

there have been a few threads started about this already. do a search, and quick. before you get your *** reamed by some of the 'regulars'.

mannydingo

Reamed by the regulars? Cua! Cua! Cua! Cua! That's funny! Anyway, if none of the two sides work, try to remember if your car went through deep water where water might have gotten into the car. If it did, the box under the seat got wet and you fried it. It controls the motors that are on each door that move the part back and forth. I know because the I got an inquiry for that box from my parts car. I quoted the guy a price after checking how much it cost at the dealership and junkyards. He agreed to the price and then never emailed me back. That happens a lot selling parts from a parts car. If one dosen't have the money to buy then say so. Don't act like you are going to buy and then not email to say you can't. That's rude!

Lay Low

I did a searh before starting this tread and read all the ones that aply, but none gave me a real solution to the problem......

Lay Low

Thanks Mandingo You have been A real Big help I'll check the box out under there, I had no clue that this is what that was for I checked my vin number on the recall page and this was a recall,do you know if my closest Mazda dealer will fix it or is it be to long to get this done, Im willing to pay or will there be a charge

Thanks again

much help

mannydingo

On a first generation? It's been over 10 years now so I doubt any dealer is going to honor a recall. Even less chances if you're not the original buyer. They will still fix it and they can still get the part but I think it costs in the hundreds. I can't recall the exact price now. Like I said, I know because I asked about the price of the unit. Give them a call and ask them how much it will be for the box alone. Don't pay for installation. That's got to be one of the easiest things to replace in the world. I imagine it must be four screws and unplugging a connector. That's after removing the seat ofcourse, that's just another four screws or nuts. If you want to buy mine, let me know.

Lay Low

Thanks a bunch, I'll call and get a price, I really do want this working. If no luck I would like to get yours if possiable, just give me a couple of weeks,I just started a new job ,if you would email me a price you would take...Thanks Really BIG help

mannydingo

Ok, I will call around again to refresh my mind on how much this goes for and get back to you by PM with price and my PayPal email adress. Also my home address in case you would prefer to send money order and you can send it whenever you're ready. Thanks

Lay Low

Thank you, Thank you, Thank you, You have beeen a life saver,just let me know and i'll send it by money order thanks.....