Vac lines
April-10th-2003, 06:56 PM
#1
Registered User
Thread Starter
Join Date: Mar 2003
Location: Towson MD
Posts: 110
Vac lines
I have turbo/vaccume guage that i want to install. What line in the 1.8L EGT motor do i tap into on the manifold? If you could give me some kind of an idea, that would be great. Thanks.
April-15th-2003, 10:06 AM
#4
Registered User
Join Date: Aug 2002
Location: Edmonton, Alberta, Canada
Posts: 118
Just used one of those plastic multi sized T's that every automotive shop has where you break off the ends for a larger fitting.
Since the line to the meter is hard nylon I just put on a piece of tight rubber hose on the end of that and connected it to the T. Otherwise I just cut one of the vac lines from manifold and inserted the other two connections of the T in-line.
Not sure how well it works since I'm still working on the car.
Since the line to the meter is hard nylon I just put on a piece of tight rubber hose on the end of that and connected it to the T. Otherwise I just cut one of the vac lines from manifold and inserted the other two connections of the T in-line.
Not sure how well it works since I'm still working on the car.
Thread
Thread Starter
Forum
Replies
Last Post
njaremka
3rd gen Suspension/Brakes
11
July-2nd-2003 06:42 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)