pro lx tranny swap
Thread Starter
Registered User
Joined: Nov 2002
Posts: 102
pro lx tranny swap
so a year after my bp swap i finally found a tranny(cheap one) so i need some info on it
but kinda unsure about what the jack shaft is
is this it
so if thats it i'll need that bracket, jack shaft, both axles, slave cyl and tranny mount(under battery)
for those who have done the swap did u replace all of the seals and stuff the shop manual tell you to do
thanks
but kinda unsure about what the jack shaft is
is this it
so if thats it i'll need that bracket, jack shaft, both axles, slave cyl and tranny mount(under battery)
for those who have done the swap did u replace all of the seals and stuff the shop manual tell you to do
thanks
That's right i'm an Admin
Joined: Dec 2001
Posts: 261
From: Ottawa, ON
jack shaft? do you mean half shaft?
and what car are you putting this in. the DX and LX have different master cylinders. but that is more for brakes. and i woun't bother swapping them out.
to swap in a tranny,you will need the braket for the 1/2 shaft, the 2 axles, the flywheel, and ofcourse the tranny. usually the slave cyl is attached to the tranny.
yes the 1/2 shaft is the shaft behind the block with the green thing attached.
Note* that green end is part of an old axle.
and what car are you putting this in. the DX and LX have different master cylinders. but that is more for brakes. and i woun't bother swapping them out.
to swap in a tranny,you will need the braket for the 1/2 shaft, the 2 axles, the flywheel, and ofcourse the tranny. usually the slave cyl is attached to the tranny.
yes the 1/2 shaft is the shaft behind the block with the green thing attached.
Note* that green end is part of an old axle.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)