New pics/Local car meet
Looks nice
Nice ride mate, I love that colour not many people like it but i do!!!
http://www.imagestation.com/members/20omz
http://www.imagestation.com/members/20omz
Originally posted by funkdaddysmack
sell the focus and get a turbo kit, hehehe
Nice pics!
sell the focus and get a turbo kit, hehehe
Nice pics!
I'm not SATISFIED with the available Protege turbo 'kits'. Fuel management is very important, otherwise *KABOOM*!!!
Besides, who wants to blow up their engine on only 6psi?? I'll wait until my tuner & chip guy figure out the P5 and get the proper tuning!
Here's my Turbo Focus:
~Karen
Originally posted by funkdaddysmack
Man, i didn't know your focus was turbo... What kind of numbers are we talking about?
Man, i didn't know your focus was turbo... What kind of numbers are we talking about?
Wiseco 8.5:1 Forged Pistons
Eagle Forged Rods
Esslinger Billet Main Caps
ARP Main Studs, Rod Bolts, and Head Studs
Quaife Limited Slip Differential (ATB)
Clutch Masters Stage IV Clutch (4-puck Race)
Custom Turbo Kit - Mitsubishi TE04H
Custom Turbo Downpipe
Custom 2 1/2" Exhaust with Magnaflow Muffler
Ford Motorsport 9mm Plug Wires
Pro-M 70mm Mass Air Meter
Ford Motorsport 42lb/hr Injectors
Custom "Chip Guy" Dyno-Tuned Chip
FocusCentral 70mm Throttle Body
Spearco Front-Mount Intercooler
GReddy Type-S Blow-Off Valve
Energy Suspension Motor and Transmission Mount Bushings
We just needed a little time to 'break it in' before we go dyno again!
Originally posted by Phantom Cruiser
Last numbers (stock engine) were 219hp&255tq; best 1/4 of 13.80@104mph. We recently installed a new engine with the following:
Wiseco 8.5:1 Forged Pistons
Eagle Forged Rods
Esslinger Billet Main Caps
ARP Main Studs, Rod Bolts, and Head Studs
Quaife Limited Slip Differential (ATB)
Clutch Masters Stage IV Clutch (4-puck Race)
Custom Turbo Kit - Mitsubishi TE04H
Custom Turbo Downpipe
Custom 2 1/2" Exhaust with Magnaflow Muffler
Ford Motorsport 9mm Plug Wires
Pro-M 70mm Mass Air Meter
Ford Motorsport 42lb/hr Injectors
Custom "Chip Guy" Dyno-Tuned Chip
FocusCentral 70mm Throttle Body
Spearco Front-Mount Intercooler
GReddy Type-S Blow-Off Valve
Energy Suspension Motor and Transmission Mount Bushings
We just needed a little time to 'break it in' before we go dyno again!
Last numbers (stock engine) were 219hp&255tq; best 1/4 of 13.80@104mph. We recently installed a new engine with the following:
Wiseco 8.5:1 Forged Pistons
Eagle Forged Rods
Esslinger Billet Main Caps
ARP Main Studs, Rod Bolts, and Head Studs
Quaife Limited Slip Differential (ATB)
Clutch Masters Stage IV Clutch (4-puck Race)
Custom Turbo Kit - Mitsubishi TE04H
Custom Turbo Downpipe
Custom 2 1/2" Exhaust with Magnaflow Muffler
Ford Motorsport 9mm Plug Wires
Pro-M 70mm Mass Air Meter
Ford Motorsport 42lb/hr Injectors
Custom "Chip Guy" Dyno-Tuned Chip
FocusCentral 70mm Throttle Body
Spearco Front-Mount Intercooler
GReddy Type-S Blow-Off Valve
Energy Suspension Motor and Transmission Mount Bushings
We just needed a little time to 'break it in' before we go dyno again!
Guest
Posts: n/a
that's frigin sweet ,, although I love the focus, I don't like the color of the car ,, and I am a avid blue lover.. however I think you did a great job with it ...
Protege5 is sweet also .. love the drop ,, hmm I am wondering ... I think it would look super agressive with the blacked out headlights ,,, can you picture it ... because of the yellow and the tint... I think that would be sweet
Bruce
Protege5 is sweet also .. love the drop ,, hmm I am wondering ... I think it would look super agressive with the blacked out headlights ,,, can you picture it ... because of the yellow and the tint... I think that would be sweet
Bruce
Thanks! Right now, running about 12lbs...should max out at 18 because of the size of the turbo.
Thanks! Does anyone want to photochop my p5 to see what it looks like with blacked out headlights?
Thanks! Marc~ there are a few places around OKC to dyno: Powerhouse Performance in MWC, HP Racing in SOKC, and Alternative in NWOKC. I would call around to get their rates! When I dyno'd my P5 (both times) it was on a special group rate.
Thanks! Does anyone want to photochop my p5 to see what it looks like with blacked out headlights?
Thanks! Marc~ there are a few places around OKC to dyno: Powerhouse Performance in MWC, HP Racing in SOKC, and Alternative in NWOKC. I would call around to get their rates! When I dyno'd my P5 (both times) it was on a special group rate.
Originally posted by Phantom Cruiser
Thanks! Marc~ there are a few places around OKC to dyno: Powerhouse Performance in MWC, HP Racing in SOKC, and Alternative in NWOKC. I would call around to get their rates! When I dyno'd my P5 (both times) it was on a special group rate.
Thanks! Marc~ there are a few places around OKC to dyno: Powerhouse Performance in MWC, HP Racing in SOKC, and Alternative in NWOKC. I would call around to get their rates! When I dyno'd my P5 (both times) it was on a special group rate.




