Protege Clubs In Maine?
#91
yeah the shop is 4 bucks an hour. Its not bad, cause with that 4 dollars you get a lift, tools, and anything you can think a shop might have. I use it all the time to change my oil.
#92
shop
yeah i didnt know if navy guys had to pay for it i know my buddy did when he went. thats a good price ill probally buy the springs next paycheck. which is the first of the month. so ill keep you posted on that. so when you wanna meet again joe? turboinum said he wont be available for like 3 weeks or something so maybe we can meet up. and when erick gets his license we can meet like half way opr something. we will figure it out.
#93
I am available after 30th until 7th, and maybe some time from 7th to 17th of sept. I have finals all of next wee, and then I have to move the hell out of school. It sucks I won't be able to see you guys change springs, because it is my next mod.
#94
springs
how bout this turbo we will help you put yours in too. lol it will be a group thing. and joe and i will be pros at it after mine im sure. hey turbo how do i post pics? like when you post you have the pic of the pro in your thing. how do i do that?
#95
At the very top, there is a button names User Profile. Click on that, and click on Edit Profile. Scroll down to the signature area. Once in there, I saw you already typed the intake and the muffler. All you have to do it to add an image like. It has to start with [IMG]here you type in the address where the picture is, i.e. http://www.blablabla.com/picutre.jpg, and then close with [/IMG] Make sure that all you type in in between is the address of where the picture is. It is pretty simple, I think you will be able to do it.
#96
Member Info
Ben, Jon, and uhh turbonium..lol
I need the following information
Name
Member Handle
Performance mods
Exterior mods
Interior mods
Headunit
fronts
rears
subs
amps 1
amp 2
and future mods of the same.
And pics.
I asked my friend's mom about shirts and embroidery, basically we are looking at 6.50 a shirt with the logo, and either just the word founder under it, or your name and founder under the logo.
price may vary once we fine tune it but that's a base price.
Erick
I need the following information
Name
Member Handle
Performance mods
Exterior mods
Interior mods
Headunit
fronts
rears
subs
amps 1
amp 2
and future mods of the same.
And pics.
I asked my friend's mom about shirts and embroidery, basically we are looking at 6.50 a shirt with the logo, and either just the word founder under it, or your name and founder under the logo.
price may vary once we fine tune it but that's a base price.
Erick
#97
stats
Well lets see
Name - Jon
Member handle - itzkcatz
Performance mods - (Not yet installed GTR complete motor 3 inch downpipe back exhaust with track pipe and summit turbo muffler) K&N Filter plugs and wires
Exterior mods- GTX Familia trunk lid garnish , GTR frount grile with intergrated rally style fog lights , and yellow smiley ball volley ball in back window
Interior mods - Stock
Head unit - pioneer cd deck
Frounts ( not yet installed in my room 6 and a quarter i think pioneer )
Rears - Same
Future mods To install this GTR motor with a huge intercooler , Haltech e6k Standalone engine management system , Short shift kit, 2 racing seats, white paint Job, 6 puk racing clutch, fidanza lightweight flywheel ,gauges, limited slip differential , 16 inch volk te37 racing rims , to lower it with tokiko shocks , mazda speed strut bars, tie bars, sway bars , GTR frount bumper with fog lights , GTX rear bumper to hold my plate, 91 tail lights , shaved emblems and door handles , clear courners , canadian manual seat belts .... thats about all i can think of for now im hoping to have the turbo motor e6k clutch rims and paint job in by next summer oh and gtr bumper and gtx rear :-) ...Jon 93 lx 5 speed
Name - Jon
Member handle - itzkcatz
Performance mods - (Not yet installed GTR complete motor 3 inch downpipe back exhaust with track pipe and summit turbo muffler) K&N Filter plugs and wires
Exterior mods- GTX Familia trunk lid garnish , GTR frount grile with intergrated rally style fog lights , and yellow smiley ball volley ball in back window
Interior mods - Stock
Head unit - pioneer cd deck
Frounts ( not yet installed in my room 6 and a quarter i think pioneer )
Rears - Same
Future mods To install this GTR motor with a huge intercooler , Haltech e6k Standalone engine management system , Short shift kit, 2 racing seats, white paint Job, 6 puk racing clutch, fidanza lightweight flywheel ,gauges, limited slip differential , 16 inch volk te37 racing rims , to lower it with tokiko shocks , mazda speed strut bars, tie bars, sway bars , GTR frount bumper with fog lights , GTX rear bumper to hold my plate, 91 tail lights , shaved emblems and door handles , clear courners , canadian manual seat belts .... thats about all i can think of for now im hoping to have the turbo motor e6k clutch rims and paint job in by next summer oh and gtr bumper and gtx rear :-) ...Jon 93 lx 5 speed
#98
Member info, logo, etc.
Hi, it's me, Rider69 again. Just wanted to chime in on a couple of things.
1. Member info: If you all go to ProtegeNetwork.org and click on chapters, Maine chapter, you will see a JOIN button at the top. Fill out the form and Erick (ProtZero) will get a copy of all that to add to the member pages. To see an an example of a member page, CLICK HERE .
2. Stickers, If Erick is showing you all the same picture as THIS , then the color shown is only for illustration. We hope to be able to get the sticker in a few different colors (White, Red, Silver, Blue, etc). Last I heard, we hadn't truely decided on the fonts but like the design. If you want, you can EMAIL ME and let me know which of the 6 sticker design you like. After we get a bunch of votes, we will take it from there and hope to have these printed out very soon.
If you all have any questions, feel free to le me know and I will help in any way I can.
1. Member info: If you all go to ProtegeNetwork.org and click on chapters, Maine chapter, you will see a JOIN button at the top. Fill out the form and Erick (ProtZero) will get a copy of all that to add to the member pages. To see an an example of a member page, CLICK HERE .
2. Stickers, If Erick is showing you all the same picture as THIS , then the color shown is only for illustration. We hope to be able to get the sticker in a few different colors (White, Red, Silver, Blue, etc). Last I heard, we hadn't truely decided on the fonts but like the design. If you want, you can EMAIL ME and let me know which of the 6 sticker design you like. After we get a bunch of votes, we will take it from there and hope to have these printed out very soon.
If you all have any questions, feel free to le me know and I will help in any way I can.
#99
name- ben.
handle- goldpro.
performance mods- intake, exhaust,altezzas,sparks,
stock head unit.
stock speekers.
soon to be lowering spring 2 inches.
soon to be t3 turbo setup.
and soon to be rims and tires.
i like the shirt ideas but not the founder thing just make them all the same.
my number is 232 1179 call whenever.
Ben 99 lx 5 speed
handle- goldpro.
performance mods- intake, exhaust,altezzas,sparks,
stock head unit.
stock speekers.
soon to be lowering spring 2 inches.
soon to be t3 turbo setup.
and soon to be rims and tires.
i like the shirt ideas but not the founder thing just make them all the same.
my number is 232 1179 call whenever.
Ben 99 lx 5 speed
#101
STICKER
just put the sticker on. it will make your car look newer than it is lol. and that volly ball is mine you ****! i want it back! im gonna take it when i come home. you copy cat basterd. hey anyone have any info on upcoming autocossing? i wanna do some. and so does my friend.
Ben 99 lx 5-speed
Ben 99 lx 5-speed