Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   Mazda3/Mazdaspeed3 (https://www.mazda3club.com/mazda3-mazdaspeed3-100/)
-   -   should i do the brakes maintenance? (https://www.mazda3club.com/mazda3-mazdaspeed3-100/should-i-do-brakes-maintenance-43990/)

acint March-14th-2007 10:49 PM

should i do the brakes maintenance?
 
Hi,
I have a mazda 3 2006. First time I had problems with the squealing brakes, the dealer charged me 200$ to service all 4 brakes and calibers. Should I be doing them regularly? They want me to do the 48k maintenance package which includes the oil change, check the belts/hoses and brakes services. I declined because it was over 200$ again.
How often should we clean our calibers and maintain our brakes? I want to do it myself but I'm not really sure. Does anyone have the service manual for mazda 3?

Thanks for answerinG!

Roddimus Prime March-14th-2007 11:13 PM

welcome to the forum. First things first

1. Brakes are very simple to do yourself BUT you need someone to show you the proper way to do them first. There are 1-2 small steps that if done incorrectly could cause you serious trouble when you try to stop.

2. Dealers are rip offs....I hate saying that but it's true. Our local quick lubes here (Express Oil) will do everything on the dealers 48k service (oil change, lubricate hinges/chasis, check belts, top off all fluids, check tires, inspect brakes) for $29.99 If you want the tires rotated and balanced at the same time it's an extra $29.99

Ask your dealer for a DETAILED list of everything done for their $200 service and then shop your local quick lubes for what hey provide in a regular oil change. If you're new to the shop and trust is an issue just tell them and ask to watch the procedure. Tell them you'd like to learn the ropes. Techs love feeling important and it also helps you when something major comes up that they know you.

KrayzieFox March-14th-2007 11:17 PM

You shouldn't need to service your brakes any more than every 30,000 miles or so. If your brakes don't last that long, then you're doing some pretty hardcore driving there!! But when it does come time to service them, it's up to you whether you wanna let the stealership do it or not. If you don't know anything about brakes and don't feel comfortable doing it then just suck it up and pay up. $200 isn't worth losing your life over you know? On the other hand if you're a pretty decent mechanic or willing to learn (like myself) then you can probably dig around the forums and other websites and find pretty detailed instructions on how to go about checking, replacing, and cleaning your brakes.

Honestly I would probably try to figure it out yourself, or at least try to buddy up with someone that can show you how. The only reason I say this is because dealerships will tear you appart on everything they do. $200 at a dealership can sometimes be done for $30 - $50 by yourself.

tailland March-15th-2007 04:45 AM


Originally Posted by Roddimus Prime
If you're new to the shop and trust is an issue just tell them and ask to watch the procedure. Tell them you'd like to learn the ropes. Techs love feeling important and it also helps you when something major comes up that they know you.

very very true. besides that: i wouldn't trust a garage where i cannot be near my car when it's beeing treated by mechanics = they got something to hide, most propbably their lazyness.

acint March-16th-2007 02:16 AM

I guess so eh. I took some mech course when i was in highschool, (years ago) and I maintain my brakes back then . but now i 'm kinda worried on how to do it on the the mazda 3 . anyone know where i can get a detail instruction with pics on how to clean the calibers?

How about brake dust, do you guys get alot of those ? That's like the #1 cause for squealing sound

Roddimus Prime March-16th-2007 06:40 AM

buy 2-3 cans of low voc brake parts cleaner and soak everything. The dust will sheet off and it'll leave drippy streaks of dirt. Keep soaking it until they dry clean. Problem solved.

acint March-17th-2007 12:59 AM

what's low voc? Can you use those ones that you spray like PJ1 Brake Cleaner?

Roddimus Prime March-17th-2007 06:05 AM

sure

romanom March-21st-2007 04:02 PM

Only brake items that a decent DIY can't do is brake caliper rebuild or replacement of the master cylinder otherwise the rest is not technically challenging.

That said, as stated in the above posts you can screw things up if you don't take your time and pay attention. The biggest problems arise when bleeding and lubricating. Bleeding is an easy but time consuming and precise activity. Done is a hurry and sloppily and you can spend all day trying to get the system right again. Just take your time and bleed a little at a time, you'll end going around the car more than once to get the air out and get that nice firm pedal.

Many people forget to use anti-squeal shims on the pads and use the proper (or no) lube on the guides, this won't hurt but it will make the system very noisy.

The advice on cleaning is very good, I would just add that you can use very fine steel (high grade) wool to gently rub the rotors and get a 3M brake rotor finishing pad (that you use with a drill) to "score" the rotor and get a hatch pattern. This helps with the bedding in process with the new pads.

Do a Google search or see link below for more specific info, God knows there's tons of it out there.

Last piece, don't bleed the system alone and get a brake caliper bleed wrench at Autozone or something, you don't want to break the bleed screw (I know).

Take your time and get some info and guides it's not hard and you need no real special tools.

Roddimus Prime March-21st-2007 06:11 PM

please only push NAPA products on this forum!

hahaha, jk. I work for NAPA and try to pimp my stuff out whenever possible.

romanom March-22nd-2007 05:15 AM


Originally Posted by Roddimus Prime
please only push NAPA products on this forum!

hahaha, jk. I work for NAPA and try to pimp my stuff out whenever possible.


NAPA sells excellent brake products :bt: Actually it's where I used to get most of my stuff, but the one near closed :tear: So now I'm stuck with Autozone, Pep Boys is near by too, but I have to much diginity to go there :tightass:

HorsySce June-11th-2007 02:02 PM

I'm planning to replace my rear brakes pads for the first time and noticed someone said this:

"Many people forget to use anti-squeal shims on the pads and use the proper (or no) lube on the guides, this won't hurt but it will make the system very noisy."

What are anti-squeal shims, how much lube do you use on the back of the pads? and what are the 'guides?' (Don't throw rocks! i'm new)

_Kansei_ June-11th-2007 02:06 PM

The shims usually come on the new pads. They are metal or plastic shims (thin wafers) that sit between the pads and the calipers. they.. prevent it from rattling or something like that.

then you have the 'sliders' (might not be the correct term) which are very thin metal pieces that attach to the calipers and sit on the two ends of the pad mounting plate. They give the pad a smooth surface on which to glide in and out.

thirdly, there are springs that are always exerting a force on the pads pulling them away from the rotors. I always forget to put one or two of them back on whenever I do brakes, then I find them on the floor in the garage a week or two later and never feel like putting them back.

HorsySce June-11th-2007 06:33 PM

Okay, thanks. One question on bleeding..when I'm actually bleeding the air out of the lines, should the resevior cap be open at that time?

Of all the procedures I've seen, no one's really address this.

_Kansei_ June-12th-2007 08:36 AM

I've only used a power bleeder (screws onto the brake fluid reservoir and pressurizes the system)so I dunno.


All times are GMT -5. The time now is 07:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands