Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   Forced Induction/Nitrous (https://www.mazda3club.com/forced-induction-nitrous-69/)
-   -   NOS need help (https://www.mazda3club.com/forced-induction-nitrous-69/nos-need-help-19181/)

tim January-20th-2003 08:16 PM

NOS need help
 
OK First off this is my first NOS install. I have a 2k ES w/1.8 auto
and I got the Nos all hooked up accept I haven't tapped the fuel line yet. My ? is where do I tap it on a protege. I don't know anyone with a Pro that has finished there nos yet. I was told the safest place is to tap it in the fuel return. Is that true?

And also Im a nos newbie an I don't know if i have a wet or dry kit because I bought the kit from my friend and he dosen't remember. Do you tap the fuel with a dry kit?

Thanks

tim January-20th-2003 08:38 PM

sorry 1 more ?
 
For a 50 shot what size jets do i need for fuel and N2O?
Thanks

SDRotary January-20th-2003 09:36 PM

NOS Answers
 
Yes you have a wet kit if you have a second solenoid for the fuel. Hence the names Wet= with fuel Dry=No fuel
Go down to your local store that fills NOS bottles and they can give you a chart to tell you approximate shots. You can adjust from there. Get an Air Fuel Ratio guage to watch over whats happening. You will need a colder range plug too. I cannot tell you where to tap into the line but would recomend getting another opinion for that one. Let me know when you do b/c I have been toying with the idea and I ahve a wet kit in the garage.

Kyle Lancaster

*1979 RX7
*2002 Protege5
*2004 RX8 waiting......

01ProES January-21st-2003 04:59 AM

Re: NOS need help
 

Originally posted by tim
OK First off this is my first NOS install. I have a 2k ES w/1.8 auto
and I got the Nos all hooked up accept I haven't tapped the fuel line yet. My ? is where do I tap it on a protege. I don't know anyone with a Pro that has finished there nos yet. I was told the safest place is to tap it in the fuel return. Is that true?

And also Im a nos newbie an I don't know if i have a wet or dry kit because I bought the kit from my friend and he dosen't remember. Do you tap the fuel with a dry kit?

Thanks

Not trying flame you or anything but if you don't know the difference between dry and wet shot, you should let the pros install the kit for you. Because n2o is very easy to mess up...

acidbbg1 January-21st-2003 09:19 AM


For a 50 shot what size jets do i need for fuel and N2O?
Here's the Chart!

35 shot= N20 31 + fuel 18
50 shot= N20 35 + fuel 20
75 shot= N20 41 + fuel 24

I am running a Nitrous Express Wet Kit!

50 shot!!

:D

That's the best i can tell u...i had the kit professionally installed..!

Nice Car!!:p

tim January-21st-2003 06:20 PM

thanks
 
Thanks no flame felt I understand where your comin from. But the only thing that screws up a NOS install is not askin for help.
I got 2degree colder ngks and a stoche meter. I was always told that you don't have to retard the timing unless you go above a fifty shot.
I went to a well know NOS expert around here and he gave me a 59 fuel and a 23 N20 and I 'm running a NOS nitrous system.

As far as wet or dry I had a brain storm after i posted an decided to go to NOS nitrous .com and figured out that both wet and dry tap into fuel but the wet has that xtra soleniod and have a fuel line that taps into the intake with the N20.

I glad you showed me that chart cause I would of put what i had in. Funny thing is the pros couldn't show me how hook up the relay. I had to figure it out.
Thanks guys
Tim

Patio January-22nd-2003 01:31 PM

i have done 2 n20 installs (well i re-installed it twice on my car) and i got to say unless you know exactly what your doing, get some damn directions or let the pros do it.

tim January-22nd-2003 04:06 PM

ok
 
Ok well since you've done 2 installs are you a pro? did you do the first 1 by yourself? Why didn't you let the pros do it?

I just asked a question and if you have N20 on your P5 then where did you tap your fuel line at. I've gone to the Pro's and since everything is done accept for that they don't wanna spend time and figure it out with me. They just say they don't know. Thats why I'm postong I figure I'd get alittle help. But anyway
if some 1 knows please post.
Thanks

Anthony Thomas January-22nd-2003 05:21 PM

There should be a test port located on the fuel rail. Take the schrader valve out, and attach the fitting to the rail. That's your fuel supply, if the kit your running is a "wet" manifold kit.

If it's dry, then you'll need to buy something like Kenne-Bell's Boost-A-Pump to get the fuel pressure up under nitrous use.

What kit do you have?

tim January-23rd-2003 06:49 PM

I have a dry NOS Nitrous (Holly) Kit.
And I was told by a local speed shop to tap it in the fuel line comin off the fuel rail by the intake plenium. But they weren't sure.
Thanks
Tim

Anthony Thomas January-24th-2003 06:44 AM

Im not sure if Protege are returnless, if they are. The you need the Kenne-Bell Boost-A-Pump or take the kit back and get a wet manifold kit.

Anthony Thomas January-24th-2003 07:28 PM


Originally posted by Protegé Menacé


*I don't know shit about Nitrous* (snip)

You should have STOPPED right there. Seems everybody turns into an expert about nitrous. This is the ONE trend I would like to see stopped online....

I have been personally using and installing nitrous systems for over 10 years and have never, ever had a issue with a kit, period and I'm not lucky, I know what Im doing.

TheMAN January-24th-2003 10:09 PM

1 Attachment(s)

Originally posted by Anthony Thomas


You should have STOPPED right there. Seems everybody turns into an expert about nitrous. This is the ONE trend I would like to see stopped online....

I have been personally using and installing nitrous systems for over 10 years and have never, ever had a issue with a kit, period and I'm not lucky, I know what Im doing.


mazdamastertech January-25th-2003 02:36 PM

drill and tap the fuel rail. i will try to post a pic later of my setup. u cannot cut the fuel and t it. it has a liner inside the fuel line and when u install the t it will push the liner inside and restrict the fuel coming in. i have done both.

tim January-26th-2003 03:04 PM

Thanks
 
Thank you so much finally some1 to give me some good addvice.
Your the best! please post some pics herte or PM me or better yet send it to my e-mail jcperformance@msn.com

01ProES January-27th-2003 01:22 AM

Good luck yo!

N20's addictive though.

Elizondo2001 January-27th-2003 09:14 PM

NOS need help
 
I have an NX 50hp kit in my 2001 Protege ES.I had my kit installed by someone else.For the fuel, they tapped into a fuel line right under my intake.It's located between the engine and the battery, right under the intake tube.I hope this helps.


All times are GMT -5. The time now is 05:51 PM.


© 2024 MH Sub I, LLC dba Internet Brands