Parking light not working ?
 

Ok, here is my problem...
I short-cutted the light_green/black wire (Parking Light +). The result is that my parkings lights and dash's light don't work anymore ! The problem is not the lights because when I unlock/lock my door with my alarm system, they light up (front/rear and dash lights) because my alarm is sending 12V on this wire... I also took a measure on the green/black wire and no more 12V when the parking light are ON. So does this mean that I fried a relay or something like that ? Can I do the job myself or do I have to go see my local dealer !?

Thanks

My alarm has been installed for a couple of months... so I dont think that is the problem 'cause the lights were working before I short-cutted the wire :( ! But I'll try it anyway ...

Any others tips ? :confused:

I tried to take a voltage measure on it, but my multimeter's red wire was plugged in the spot for a current's measure !!! So the 12V of the green/black wire was directly grounded...

I checked my fuse and one of them was fried :D

It was the "TAIL" one ... so everything is back to normal ...

Thanks anyway blue LEDz !!!

thats what i did when i ran both my washer LEDS and my Foglights to the Passenger Parking lamp. I was like WTF, jus my headlights worked and nothin else.

I felt soo dumb when my friend steve took 60seconds and found out the problem


Glad to hear ur back on track like me