Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   Exterior/Interior/Audio (https://www.mazda3club.com/exterior-interior-audio-4/)
-   -   Indiglo gauges (https://www.mazda3club.com/exterior-interior-audio-4/indiglo-gauges-172/)

ToMaC October-6th-2001 06:56 PM

Indiglo gauges
 
Anyone know if any Indiglo gauges are available for the P5? I see a set "like" them on ebay for protege's, they look exactly the same. I am skeptical about getting them, can anyone fill me in?

Ambient October-6th-2001 07:09 PM

They should fit, but do some research before you order if you are still skeptical....

BUT, this is what I like better. Intelliglow Needle Kits at www.importintelligence.com

IMO they look much better. And aren't that expensive. I went through days of emailing to the and found that they will work on the 01 Proteges.

If I weren't dead set on only spending my money on performance parts I'd get them.

Eric F October-6th-2001 08:11 PM

Those are interesting. I hadn't seen the needles before. The Indiglo gauges will fit your P5, but I've heard the installation is difficult. Several people have broken needles trying to get them installed. I guess that would apply to the Intelliglow needles also.

Bolock October-20th-2001 12:36 AM

Gauges
 
Can some one tell me hoy te change the gauge backgroud on a pro 00??

I dont want to break them

Bolock October-20th-2001 08:22 AM

gauges
 
i already have the backgrouds but I read that the needle are not removable or something like that. and I dont want to break them by mistake.

Bolock October-20th-2001 04:56 PM

ok ill take it apart and check it out. Ill let know

tresdos3 October-21st-2001 09:03 PM

advice on indiglo request
 
guys, ive just been on ebay and found heaps of indiglo clusters..but i need some advice as to which is best.
there are 5 colour indiglos form a company called 'indigloking'
6 colour indiglos from a company called 'celluncinit'
and 7 colour indiglos from a company called 'unitedindiglo'

i was just wondering if any of u had purchased from these or other companies that make em? any advice would be greatly appreciated.

also my tacho is located on the right hand side...(some of the indiglos shown on ebay had the tach on the left.and the fuel on the right)..will this matter if i get one of these...

01MP3CLONE October-22nd-2001 01:45 AM

indiglo
 
The sets you see are not FULL clusters, they are just the gauges faces which will sit on top of your stock faces, but beware before buyin that our needles are not meant to be removed, I made the mistake, and now i must ethier A. by a new cluster from the dealership, or B. find a wrecked 99-01 protege and get the cluster from that. There is specific directions someone had mentioned here on this site on how to install indiglo gauges, i bought the ones from unitedindiglo, and the transformer blew after 3 days of using them, its was a mistake for me to buy em, now i wish i didnt. so I payed $32.00 for the gauges which now dont work w\o buyin a new transformer, and one the needles broke causing a $250.00 mistake. So do what you do wisely

tresdos3 October-22nd-2001 07:58 AM

i had a gut feeling that the 7 colour united indiglos werent good quality..how u ask? well i noticed that no one seemed to be putting any bids on them...compared to say the five colour ones by 'indiglokingdom' which had several bids on them.



>>Makaveli,

what are you talking about brother...if i can't get a variety of opinions then why bother with this forum

in addition while i appreciate 1mp3clone's comments there are several questions which i still need the answers for..

1) has any one had any experience with a.) indiglokingdom or

b.) celluncimit

2) can anyone tell me if the fact that my tacho is on the right hand side makes any difference.?

3) apart from the three companies that i have singled out who else makes indiglos for the 00 protege?

i need YOU GUYS OPINIONS!
OTHERWISE I MAY END UP BUYING BOGUS CRAP LIKE 1MP3CLONE.

01MP3CLONE October-23rd-2001 04:47 AM

indiglo
 
As far as I know there are only 2 companies selling these indiglo gauges for our cars, some consider the 5 color gauges as 6 color if u count the WHITE FACE, and as for the 7 color I dont know, APC and EL are the 2 companies that I know of, I have spoke with both and overall the APC seem to be the better quality if u can hack seeing the APC logo on ever single gauges personally I didnt wanna see that so I went with the EL, now I wish I had gone w\ the apc for I would at least still have a use for my indiglo gauges. As for the sellers, more then likely they are all selling the same brand gauges, my suggestion would be to email the seller and as them what brand the gauges are, if they are the EL gauges then I would wait til EL fixes their little problem with the transformer for they are recalling all that have blown. APC on the other hand makes a great quality product, just likes the logo on everything. Do what you feel its your car, thats the way I feel. No one but yourself makes the car payment.


PEACE

tresdos3 October-24th-2001 07:29 AM

>>>1mp3clone

thanks for the info!!:bt: do you know the website where i can find out about APC..are they a lot more expensive than say the el you mentioned?

cause i'm in australia its more difficult to pick up a phone so if anyone knows a website for APC ..

so u guys have ur tacho on the left hand side ..shit i didnt know that!

Ben_D November-7th-2001 11:33 PM

Help Me
 
Ok i know this question has been asked like a million times but i just got my new guage cluster from ebay for 50 dollars from a 2000 es i got a dx put the gagues in and volia tach:blue:, but now i want indiglo guages any1 here actually installed the indiglos guages without a problem. if so how did ya do it and how does it look after you did what you did.

thanx in advanced,
Ben Dean

eeterp November-7th-2001 11:44 PM

I think Edwin wrote something about it in his protege FAQ. That'd be a good start

y2kprotege November-16th-2001 02:11 PM

indiglo gauges
 
Could someone please help me on my indiglo gauges. Ive heard to cut the gauges, then i heard people say not to cut the gauges, the gauges wont slide over the needles because there too big. Ive also heard not to remove the needles the instructions they came with say dont not remove needles but how else am i going to install them? I cut one of the gauges but dont know if it will work now please help i have a 00 protege lx or you can email me at jamall3@yahoo.com

Fulminatus November-16th-2001 02:18 PM

DO NOT take the needles off. Others have tried and broken their needles. I hear there are no replacement needles for sale, you have to buy the whole gauge cluster thing again. $$$$

Have you consulted the FAQ. I can't remember if it mentions how to do it there.


All times are GMT -5. The time now is 02:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands