Need help on installing MAP-ECU in 1.6 LX
Thread Starter
Registered User
Joined: Sep 2003
Posts: 30
Need help on installing MAP-ECU in 1.6 LX
Hi Folks,
Sorry for the very long absence. I have been very busy at the hospital, and the supercharged 1.6 has been running strong with no probs.
However, a friend gave me his MAP-ECU, and now I have decided to install it and remove the troublesome MAF. Now, I need help in figuring out what the five wires in the MAF harness are: specifically, I need to know which is the intake air temp sensor, and which is the airflow sensor. Any help would be greatly appreciated.
I will let you know the results of the install, once completed.
Thanks
Mota Mazda
Sorry for the very long absence. I have been very busy at the hospital, and the supercharged 1.6 has been running strong with no probs.
However, a friend gave me his MAP-ECU, and now I have decided to install it and remove the troublesome MAF. Now, I need help in figuring out what the five wires in the MAF harness are: specifically, I need to know which is the intake air temp sensor, and which is the airflow sensor. Any help would be greatly appreciated.
I will let you know the results of the install, once completed.
Thanks
Mota Mazda
Registered User
Joined: Apr 2003
Posts: 778
From: New Jersey
Looking directly at the connector on the harness side put the tab on the top and letter them from A - E
A is power
B is GND
C is the maf
D is the iat
E looks like another gnd prob specific to the Iat.
C and D im sure of the others should be easy enough to check with a multimeter.
A is power
B is GND
C is the maf
D is the iat
E looks like another gnd prob specific to the Iat.
C and D im sure of the others should be easy enough to check with a multimeter.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)