jftizw |
January-29th-2002 11:03 PM |
Im pretty sure that the one thats in the airbox is just a temperature sensor. all i did was i took off the rubber hose for the intake that is on the car, and made a hold in the rubber just big enough to stick the sensor through. it seems to have worked really well. just make sure that you make the hole far enough back so that you can get the MAF sensor all the way back on the hose. also i think tomorrow im going to put the bottom of the airbox back in the car. the cone filter that i bought is small enough to almost fit inside of it, so im going to stick it down inside it to use it as a heat shield. after going out and running a little bit earlier, i stoped and checked it to make sure everything was holding in good and tight, and i noticed that the filter was very warm to the touch. so im hoping that the bottom of the airbox will keep the heat from the radiator away from it. the fan on the radiator blows the hot air right on the filter.
|