Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   2nd Gen Protege (https://www.mazda3club.com/2nd-gen-protege-37/)
-   -   Dynoed my LX with some mods. (https://www.mazda3club.com/2nd-gen-protege-37/dynoed-my-lx-some-mods-35531/)

mazdata July-9th-2004 03:07 PM

Dynoed my LX with some mods.
 
Went to my shop today, and NOT with my Honda! I took my 96 LX up to B and T and got my car dynoed on the dynojet. Some numbers...
121.86whp@5800 rpm
109.37flb tq@4200 rpm

My mods incluce, ebay generic intake (in fact bigger than manufacturer intakes), 2 1/2 inch custom made exhaust, 1.8L Fuel Injectors, Nology Spark Plugs, 1.8L Fuel Rail, Honda Radiator Rigged on :eek:, and some other shit I can't really remember. Some of this shit was pretty hard to do. I also have some weight reduction for the street, which incluces stripped back, carpet =gone in back and trunk, and no spare.

FC3s Boy July-9th-2004 04:21 PM

nice #'s out of it

midnightblue97 July-9th-2004 07:17 PM

Guess you better change your signature tehn. :D

ghettopro July-10th-2004 11:42 PM

LOL!!!.........DO you have 2 pros or something??...

mazdata July-12th-2004 02:27 PM

yeah I've got 2 LOL

Intruder August-9th-2004 08:44 PM

That's hard to believe. Do you have the dyno sheet?

Phantom Cruiser August-9th-2004 09:05 PM

what happened to your tq??

loganss August-10th-2004 08:07 AM


Originally Posted by Intruder
That's hard to believe. Do you have the dyno sheet?

Yeah I'm with him. Those number are pretty nice especially with the mods u have listed.

Any chance of getting the dyno sheet posted?

Roddimus Prime August-10th-2004 08:29 AM

Ttiwwd

FlySwat August-15th-2004 12:56 AM

Theres really no use in swapping to a larger injector on stock chip, unless you actually need the extra fuel to keep from running lean, which would only happen if you had radicly advanced timing, or a forded induction setup.

Otherwise, your just going to run rich, which robs you of power, ruins your fuel effiency and displaces engine oil, causing extra friction on the rings.

Gen1GT August-30th-2004 07:19 AM

Ya, those numbers aren't bad for such few mods. I'm assuming that's a BP-DE?

loganss August-31st-2004 07:48 AM

If he is in the US the 96 LX comes with the Z5

midnightblue97 September-4th-2004 04:45 AM

yeah and he hasn't posted dyno sheets yet.

marciobusi September-12th-2004 05:32 PM

woa boy, after a long time w/o posting in here...

call my attention this dyno #. Its gotta be 1.8L . Z5 putz out 92HP according to manufacture. Minus all losses, ... < 80HP.

midnightblue97 September-13th-2004 12:11 PM

apparently he is from the US which means second gen LX = 1.5l unless he did a swap and for obvious reasons it seems as though he does NOT have a swap.
Therefore, until I see dyno sheets I call BS

marciobusi September-13th-2004 12:53 PM

... 50 shot I'd start to believe.

midnightblue97 September-17th-2004 06:03 PM


Originally Posted by marciobusi
... 50 shot I'd start to believe.


Originally Posted by mazdata

My mods incluce, ebay generic intake (in fact bigger than manufacturer intakes), 2 1/2 inch custom made exhaust, 1.8L Fuel Injectors, Nology Spark Plugs, 1.8L Fuel Rail, Honda Radiator Rigged on :eek: and some other shit I can't really remember. Some of this shit was pretty hard to do.


That makes me think otherwise.

Gen1GT September-19th-2004 09:44 AM

Yes, there's no way he's making that much power from a 1.5, with only mod being 2.5" exhaust, which is insanely large for a 1.5. Fuel injectors is not a performance mod. They're items you install to take advantage of performance mods. Maybe the rad got him 40whp. And also, Dynojets give power to the first decimal point. ie, 356.4hp, not 356.43hp. 3 hundreths of a horsepower is unmeasurable, especially considering a car can be off by 1hp on a back to back run.





:bsflag: :bs:

loganss September-20th-2004 08:12 AM

Yeah I'm going to have to also say that this guy is spitting out a lot of BS. It's been a while 1.5L :bs:


All times are GMT -5. The time now is 09:38 AM.


© 2024 MH Sub I, LLC dba Internet Brands