Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   2nd gen Engine/Drivetrain (https://www.mazda3club.com/2nd-gen-engine-drivetrain-58/)
-   -   car problem (https://www.mazda3club.com/2nd-gen-engine-drivetrain-58/car-problem-14800/)

JRizzle October-20th-2002 02:13 PM

car problem
 
there is somthing wrong with my car, and its pretty bad. when i rev the engine, it like...stutters almost, and almost stalls, and when i drive it, first gear is fine but second gear stutters and i havent tried 3rd yet. Any ideas?

turbonium959 October-20th-2002 03:57 PM

Hey, Jordan. Do you think the addition of the muffler could have done something? I can't think of a way how it can, but besides that, have you done anything else to the car?

THEGOLDPRO October-20th-2002 04:34 PM

he did the same intake think you did

turbonium959 October-20th-2002 05:54 PM

In that case, what did he do with air temperature sensor? Did he leave it out in the engine bay, or did he slide it inside the filter hose? Not that it would matter, because it could worsen his mileage. Though, I know that on GM cars if the sensor does not sense the right temperature (i.e. too hot), or not plugged it right, the car won't even start. But those are GM cars.

JRizzle October-20th-2002 06:04 PM

i dont know what it could be, all of a sudden out of nowhere yesterday it just shit the bed, its running now, but its still lugging and stuttering in 2nd, i dont know what to fix or if i should just bite the bullet and take it to a mechanic

THEGOLDPRO October-20th-2002 06:22 PM

no alex we put the sensor in the pipe like you did, its reading the right temp.

THEGOLDPRO October-20th-2002 06:23 PM

but jordan are any check engine lights on????

G2Protege October-20th-2002 07:18 PM

under the throttle body is a hose(tube) that splits into two pieces...get a hose(tube) that is only 1 piece that doesnt split...put it in that spot then into the intake tube...thats what i had to do to keep my car running when i first installed the intake...after i took off that splitter piece and made it one piece and then into the tube(where the hole is in the intake tube) it worked like perfect...just an idea...

JRizzle October-20th-2002 07:57 PM

check lights
 
Actually, one was on for a while, but it was not on when all this stuff started to happen, which makes this all the more mysterious, ive heard a couple people say maybe its my intake, but would it cause this, this long after being intstalled? or if its the exhaust, how would that work?

turbonium959 October-20th-2002 09:09 PM

I would not think that it can be your intake or the exhaust. If you are saying that it happens when in 2nd gear specifically, then it might be the tranny. I have a 97 2nd gen too, but mine is auto, so I can only guess, but if I were you, I would take it for a diagnostic run, and then find out what the code means (if there is one).

JRizzle October-21st-2002 01:43 PM

problem
 
its really just when i nail the gas really quick, it kinda has a hard time catching up or somthing. i drove it around the block for a short while today, and it seemed fine when i drove at a normal pace, but when i kinda nailed the gas quickly it kinda stuttered, so i still am clueless as what is wrong.

pollito14 October-22nd-2002 07:05 PM

Stupid suggestion but one time I was working on my engine and I removed the air intake tube and filter, when I finished I reinstalled everything but I forgot to plug the air sensor back in. It created a stutor or whatever When I would get to high speeds it was ok. When I looked around the engine bay, I realized that I had forgotten to plug the airflow meter back in.

JRizzle October-22nd-2002 08:45 PM

Im pretty sure that is not the case, but it is a good idea. when we did it, as ik recolect, we specifically made sure that the sensor was in. the current theory is the fuel pump is fucked up. so im looking into that.

JRizzle October-22nd-2002 08:46 PM

by the way, whose car is that in your sig. that is pretty sick. looks like the same model as me.

pollito14 October-22nd-2002 09:24 PM

I don't know I wish I did but I do know he's from Barbados. Look in the gallery on Protege PR

it's on my sig above the picture.. click Protegepr then the image, then "galeria" then extranjeros and from there on you can do it. You can't go too far 'cause there isn't THAT much content. Give me your opinion of the site if you visit it.


All times are GMT -5. The time now is 08:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands