Loundarp :
Yes I got a DOHC in the 323 5 speed with a cat back system as my only modification, besides the RX-7 AFM with the protege spring (instead of the original RX-7 spring) that gives tension to the flap door inside the Air Flow Meter. oh and my cone type air filter ofcourse. PseudoRealityX: It's good to know about the fuel presure regulator, I always had my doubts about it. Then the bored throttle body, I'm gonna take your word for it. The clutch I defenetely need it. The one I got is still good for every day driving. I'm gonna star looking for another gearbox too. Mine has pass 340,000 miles in it. As you'd understand it is a little noisy !!:eek: I was surfing the Corksport page and found this: Cork Sport peformance camshaft set The Cork Sport performance cam set are brand new camshafts not regrinds. The specs are .352 lift and 205 duration at .050 lift for both intake and exhaust. The estimated gains on a mildy modified motor are 12 hp. Price: $ 425.00 Speed is expensive !! But like it !! |
Originally posted by Loundarp 16.6 is some nice number but with all mod he had done, he should run low 16???? Applying the track published correction factor, he's running 16.146 @ 83.4mph, but I think the trap speeds always seem a little low there (or maybe they are high at other tracks). |
Davard, thanks for the explication, its make more sense now.
i live at the sea level and i did 15.952 @87.5mph with a 95gt with close to no mod. |
i was realy happy wen i see this time. but i did some weight reduction. i removed rear seat, front seat, spare tire and half off tank of gaz. the only thing i had done on my engine is advance timing at 14, put a new stock air filter and removed the S under the filter and my cluch is not in good shape. need a act clutch :D
here the time slip, i'm number 15 http://personal.nbnet.nb.ca/loundarp/drag_slip.jpg back in topic, ManuelGz how much your car weight ??? |
That's a good question, I was thinking of taking the car to a weight station and find out. It says on the door that it weights 3,300 lbs. I'm gonna put it on a diet, including my self !!
|
The non-spectacular 60 foot makes that 1/4 mile time and speed all the more impressive. My best (at LACR) is a 16.753@79.746mph, with a 2.379 60 foot. Corrected, that's still only 16.2 @ 82.4mph. I didn't remove anything other than the spare, though. My Protege probably weighs about 2700lbs with driver (2475 without). I'd imagine the 323 is at least 200lbs lighter.
|
GVWR
The weight on the door is GVWR, which is max allowable weight including car, passengers, and cargo. You would have to subtract weight capacity to get curb weight.
|
Weight
As far as I know, the '90+ 323 weighs a little over 2200lbs stock.
323 (soon to be 1.8L DOHC 323) |
Hey, You want a phat N/A Setup? i can hook you up w/ almost anything you need,
I can get you: 11.0:1 1.9 Over bore pistons Forged and Balanced w/ rods, 7.7 lb flywheel Cams Camgears Bored Throtlle body New AFM for Hella more fuel, I'm doin 10PSI no fuel mods except |
Hey, You want a phat N/A Setup? i can hook you up w/ almost anything you need, BUT u gotta have DOHC :)
SOHC i can get some... but u'll be restricted to many.... I can get you: 11.0:1 1.9 Over bore pistons Forged and Balanced w/ rods, 7.7 lb flywheel Cams Camgears Bored Throtlle body New AFM for Hella more fuel, I'm doin 10PSI no fuel mods except My AFM on a VJ11 turbo. Valvetrain including lash adjusters, solid lifters, Head gasket metal to keep same or lower compression by .2 better clutch short shifters front/rear strut bars lower tie bars and list goes on. Email me @ Protege-323@Houston.rr.com here are my mods: 1994 Mazda Protege DX Engine: 1.8L DOHC GTX Manifold, VJ-11 Turbo running 10 Lbs of boost. VR4 DSM SMIC Turbo XS BOV 1986 Toyota Celica AFM (recalibrated by me) Autometer 2pod cluster off Civic, Autometer Boost/vac gauge Autometer A/F Ration Gauge Red/Green Lighted CLuster Top Speed Strut Bar Red Valve Cover Nology 10mm Plug wires off 1.8L SOHC High Speed Fan, Toda 7.7lb Flywheel ACT Clutch 200lb/ft B&M Short Shifter Reinforced Mazda motorsports motor mounts SOHC tranny still w/ DOHC engine SOHC ECU (STOCK) Konig 16" rated R's Khumo 205/40Z/r16 Ecsta Supra 712's Intrax 1.75" lowering springs New Autozone Struts (lifetime warranty) Kenwood Head, 2 Kenwood amps 320x4 and 400x4 Kenwood 6.5 on doors Pioneer 6x9 Back JDM headlights w/ JDM Corners GTX front bumper (in customs ra now getting approved) SS CLutch Line Reinforced front cross beam bolts 2.5" Catback w/ Nokya 2.5" in 3" tip (now nocked off) SS muffler Future Plans: SS brake lines, Brembo rotors Brembo Pads/Shoes BMW Arctic White Paintjob Ground Control CoilOvers Cusco Front camber plates Corksport Camshafts Toda Cam Pulley & Solid Lifter Kit Unorthodox racing Lightweight Pulley New High flow PUmp, Injectors, Fuel pressure regulator so i can rund 18PSI of boost, i fall short of fuel after 12PSI so i knock New 6AL MSD ignition w/ timing retard:( :) |
Where did u get the Jdm headlights and courners?. Do u have pics of ur car?. Ur car sounds awesome but why r u using a sohc transmission? . Do u think its gonna hold 18psi ? .Jon 93 lx
|
it probably won't cuz it SUPPOSEd to hold no more than 200hp, BUT this li'l car is so underated that i dunno if i should go by that. later i'ma upgrade the tranny, the weakness someone told me is a certain pin that they makde it weak, i know a guy who changed the pin on his thunderbird's mazda G tranny like ours, and put a u brace and is holding 260+ so i'ma get him to do it, if not i'll get a GTX/GTR tranny.
Corksport has the JDM's for 250. really sweet. If you can get into the egroups of Protegetech.com goto photos and carlos's 94 hybrid, i got the pix there, i'm working on a site to post all my pix on. or gimme ur addy and i'll send em to ya. i don't know how to post pix here. :( less ya'll can tell me. Carlos 94 protege turbo Hybrid |
i need a new clutch for my pro 1
and maybe a turbo if it is good price |
Itzkcatz@aol.com 250 sounds like a good price...Jon
|
250 for wat and wat kind
|
All times are GMT -5. The time now is 12:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands