engine stalling when stepping on Gas
Hi,
I just bought an intake kit from ebay and installed it on my 1990 Protege LX 5 Speed. It ran fine for 2 minutes. After that, when i step on the gas, you can hear a phut phut sound. And the engine just want to stalled out. Took it to a well know shop and they told me i need a new Mass air meter and the hoes from that. And get this, they want to charged me about $600 for labor and new parts. I told them what if i want a used part and they told me around $300 total. I would probaly installed it myself but i can't remove the wire from the mass air meter. Any advice would be helpful. |
buy someone elses stock air flow meter and swap it in. or take out the kit you bought from ebay and reset your car's computer by disconnecting the negative on ur battery for like 5 minutes
|
Originally posted by protegeDX buy someone elses stock air flow meter and swap it in. or take out the kit you bought from ebay and reset your car's computer by disconnecting the negative on ur battery for like 5 minutes I reinstall the stock air filter. Still doinging the same thing. |
sorrie i did the best i could :D
maybe someone else could help u |
Originally posted by protegeDX sorrie i did the best i could :D maybe someone else could help u no problem. Thanx for the help |
Originally posted by protegeDX sorrie i did the best i could :D maybe someone else could help u |
Originally posted by mike_moss my car is doing the EXACT SAME thing@!!! (but i havent had enough time to fix it yet. :() you might want to just buy an rx7 air flow meter while you're at it....supposedly they give a bit more power. :bt: that is what i will do when i get the chance! Too late, bought the part at the junkyard for $150 plus $100 for labor and engine dianogtics. I know i got ripped off. Oh well. |
Originally posted by mike_moss uh, ok. :rolleyes: did it fix the prob??? :) Toan |
i have the same problem
WARNING TO ALL MEMBERS BUYING INTAKES OFF OF EBAY... apparently the mass air meter is very sensitive so don't go tugging or pushing at it over aggressively or this will happen to you. Bought an intake filter and adapter off of ebay. for $10 u get an adapter that doesn't fit, fitler that barely fits due to it's large size. installed the new intake but the car would not start. went back to stock intake, the air would not flow.did adjustments and got it to start and run but when gas was let go, it would die automatically. will getting a new mass air meter fix this whole thing and get my car running? sure it is not any problems with sensors that lay around the tube area? any suggestions, this is my only car and ireally need help. |
did you remove the mass air flow sensor? If yes, did you take the two screw off? Try a new mass air flow sensor. If you want a new one from the dealer, it's going to cost you like $400. Their is no aftermarket part for it. Next best thing is get it from the junkyard. Hope it work out for you.
|
what do u think about searching at OEM retailers for the air flow meter? will the price be outragous? im taking it to the shop to see if it is anything else that might cause this problem. seriously i don't know how i could have messed this up.
|
one thing to add..this is obeytheflag i lost my password so i signed a new one
|
Originally posted by protege9485 what do u think about searching at OEM retailers for the air flow meter? will the price be outragous? im taking it to the shop to see if it is anything else that might cause this problem. seriously i don't know how i could have messed this up. |
im finding OEM air flow meters for about $150 at oem sellers.
|
that's pretty cheap. I guess i got ripped off
|
but im hearing something else to fix this problem. this guy says to take out fender ducts, everything that is like a plastic tube (resonater, all the stuff that brings). he says that the stock filter is not getting any air and with this there will be no problems. what do u think? have u tried that?
|
also to add i don't think the MAF is that sensitive. couple years ago my car got into accident and it was pretty bad (dude the license plate has a hole) the bumper was changed and repairs were over 1k. just to add
|
All times are GMT -5. The time now is 11:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands