Post your year, model, mods and miles
 

Simple enough!

1992 Protege DX
Roadmaster 6" subs (replaced rear speakers), Panasonic h/u
188,000

94 LX project, 171k, all stock, needs clutch and axle.
94 DX, 150k, all stock, needs new rim and struts.
92 LX, 140k, needs A/C work
94 LX, 137k, custom bodywork by "Freeway Divider Walls of Texas". Now gone to the junkyard in the sky.

94 protege with 1.8 dohc kia sephia engine,kkk 26 turbo,custom manifold, 3" complete exhaust,conquest front mount intercooler,RX7 injectors,RX7 flow meater,BPO9 ECU,bronze 5 puck cluth disc,15" polo wheels with kelly tires.56k milles. interior stock with some gauges for the turbo sistem.

94 dx sohc teal green
110k mile on motor 1000 after rebuild
custom intake, bored tb, full mandrel exhaust with n1 muffler, advanced timing and port and polish

93 lx 5speed GTR motor going in :-)

mazda 323 93

1.8L Dohc , pacesseter header, 2.5"catback , intake(home made), Bp09 Cpu, flow meter stock, port and polish, unorthodox pulyes

14.8@92

92 protege 1.8 DOHC. all stock

going is with in the nexy month, a td04h turbo setup.short shifter, front upper strut bar, new exhaust system,and a nice audio video set up inside.
oh and a body kit coming soon too!

89 mitsubishi starion. 3" exhaust turbo back,T3/T4 60T, custum exhaust manifold, HKS MBC, Cold air intake, Intercooler hardpipe kit, fuel pump, lightened fly wheel, balance shafts removed, 1G DSM mass air. Also, 92 protege 172,000 miles.

93 323 base with 124k

-BP-DE motor, with custom turbo setup, and lots of extras
-17" wheels and tires for street, 15" wheels and tires for track/AutoX
-lowered
-clear corners, rear turn signals
-custom exhaust
-neat interior goodies
-etc.

it's all in my signature.

Mmmmm Sterion.

i got an intake and a whole lot of duct tape under the hood, soon to be a turbo and a whole lot of duct tape (hopefully)

93 Teal DX, auto, 199,000 miles, original owner. All the mods below including a Pioneer DEH-1500 H/U, 6.5" Pioneer speakers all around.

my car is now minus the turbo BP, as it since cracked a piston, cracked the head, and bent the FUCK out an intake valve...:mad:

why?

signature is self explanatory

All I got is a PRM Pro Intake for mods.... Next month will be the installation of lowering springs, 17" rims, and header (and exhaust)!!!!!!!! 130,000 miles

there are Escort coilovers that will work on the Pro for $40 USD on Ebay.

Which Escort coilovers (what years)? I've seen people use ZX2 struts too, and was wondering what the benefits were.

91-96. they also have some cheap CF hoods too. :)

The CF hood would be interchangable?

seeing as your car has the square hood, yes. the only concern you will have is that the hood hinges will make the hood sit up higher than the fenders. you can shave them down to correct this problem, or try to fabricate some holes to fit the EGT hinges. :)

my cars
 

91 Ford escort gt.. ( my car )
custom intake ,rx7 vaf, coilovers, advanced timing,pacesetter short shifter,17x7 rs rims,obx cannon exhaust, n best of all protoge grill =)
92 Mazda protoge dx ( mine, n my sister)
just got it today...still planning .....
89 Toyota Corolla sr5 ( moms car, n mine 10%)
2 12''jbl, pyramid 1,000 watts amp pionner front and back speakers, n pionner deck, escort gt rims.gts sideskirts
2004 sienna LE

soon 2004 evo 8( my family car ) =P

1990 protege lx 5speed-stock
the hood fits, but has issues.
again, SEARCH for my post about my hood coming in *sigh*

pm me please. i want to know EXACTLY what you had to do to get yours to fit. :)

will soon have some picts posted up soon

1991 Protege LX with GTR motor
117,300 miles on the body, miles on engine and trans unknown
Too many mods to list...check sig for a dose

1992 Protege LX
234,000 on the body
read the signature

here

91 protege lx(needs paint job)
swapped in a KF-ZE j-spec engine
full exhaust from the header back 2 1/4
cold air intake
bosch platinum 4 spark plugs
mods to be installed in the next week or so:
magnecore 8.5mm wires
walboro 190 fuel pump
FMU
14b turbo boosting 5psi
frount mount intercooler(off 91 turbo probe)
volvo factory blow off valve
2 1/2 inch down pipe

145,000 mi on body less than 10k on built motor

My Ride..."1995" 323 1.8 DOHC (Kia Engine) whit BP09 ECU & Rx-7 AFM , 1.6 tranny , ACT 4puck cluth , Ported , Polished Head & shaved head , 4-1 headers , 2002 Miata Pistons (10.0:1) , full 2 1/4 Exaust , 65mm Throttle Body (From a Ford Explorer)... Etc

Right now I'm blueprinting the engine , changing pistons to low comp , balancing , etc... for a turbo setup.

Here it is... My Babe ( I miss You )

http://www.bubu.itgo.com/images/323_foto_nueva.jpg

91 LX
1.8L 16V dohc
195,000 miles

it was free so no complaints

91 LX
1.8L 16V dohc
195,000 miles

it was free so no complaints

1991 Ford Laser TX3 Turbo 4wd, 1.8 16v DOHC Turbo, 185,000km (not sure what that is in miles)

91 GT + KL-ZE swap

370,000km ( 9 previous owners ) in CANADA

with ... get this ORIGINAL PAINT

noticible rust only on 1 rear door ( try finding a Honda with that many km on it in Canada with only one visible rust hole )

:D

i know this is a 1st gen tread but:

i'm running a 97 protege with the gtx motor swap( 70k on current motor). check out my car domain site for a list of mods (ie: .40 over pistons, haltech, etc)

so far i'm trying to max out everything before upgrading to a larger ball bearing. after checking out my page, any other suggestions?

91' SE

clarion head unit, 4 6.5 clarion speakers
custom broken intermediate pipe for that low rumbly sound
alarm
GT bucket seats

soon to come:
DOHC
new paint
something alittle nicer than my steelies

big dreams, small bank account

'93 DX
Custom Front Grill
Custom big mouth FACTORY bumper. ha-ha
Basically, all that's been done to it are repairs.
138K on engine and trans.

Trying to install a rear bumper, was a friend's.


I want to add a CF hood


Parts to come:
15" Konigs
Pacesetter Exhaust
B&M short shifter
Front upper strut bar (Can't find a rear)
and much more...

1993 protege DX sohc

garett t3 turbo, custom made manifold,vortech fmu
inline msd fuel pump, rx7 injectors,saab intecooler
hks bov,turbonetic wastegate, turbonetic boost controller
autometer gauges,custom made air/ fuel computer,greedy turbo timer,3 inch exhaust,gator race axels, kia throttle body, rx7 air flow meter. much more........