Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   1st gen/323/GLC Engine and Drivetrain (https://www.mazda3club.com/1st-gen-323-glc-engine-drivetrain-59/)
-   -   Crx This !!!!!! (https://www.mazda3club.com/1st-gen-323-glc-engine-drivetrain-59/crx-20583/)

1ofdfew323 February-13th-2003 01:21 AM

Crx This !!!!!!
 
well as u guys can remember it is me who ask for u guys opinion about the CRX or my 323........anyhow i didn't get the CRX . y because i like this mazda i think it is very unique......but then i need some help. i bought a bp 1.8 dohc engine last week and im doing the swap on 2/20/03 and here's what i have before the swap and if missing something please let me know and list it down. thx..
BP ecu, engine wire harness, complete engine including the intake manifold and exhaust manifold...

Here's some stuff that im not sure i need;
1) dohc engine mount on the cam sprocket side
2) AFM can i use my sohc? will it matter if i use DOHC AFM ?
3) im using my stock sohc tranny, will it be able to take the 7,400
redline then POWERSHIFTING?
4) can i use my sohc alternator?
5) how much horsepower and torque does this bp 91-94 engine have? (dohc)
6) would i be able to hit atleast 15.7 on a 1/4 mile (streettires, full interior, stock engine)?
7) whats a carb legal headers can i buy for this engine?

THANKS FOR UR HELP......

funkdaddysmack February-13th-2003 07:59 AM

Re: Crx This !!!!!!
 

Originally posted by 1ofdfew323
well as u guys can remember it is me who ask for u guys opinion about the CRX or my 323........anyhow i didn't get the CRX . y because i like this mazda i think it is very unique......but then i need some help. i bought a bp 1.8 dohc engine last week and im doing the swap on 2/20/03 and here's what i have before the swap and if missing something please let me know and list it down. thx..
BP ecu, engine wire harness, complete engine including the intake manifold and exhaust manifold...

Here's some stuff that im not sure i need;
1) dohc engine mount on the cam sprocket side
2) AFM can i use my sohc? will it matter if i use DOHC AFM ?
3) im using my stock sohc tranny, will it be able to take the 7,400
redline then POWERSHIFTING?
4) can i use my sohc alternator?
5) how much horsepower and torque does this bp 91-94 engine have? (dohc)
6) would i be able to hit atleast 15.7 on a 1/4 mile (streettires, full interior, stock engine)?
7) whats a carb legal headers can i buy for this engine?

THANKS FOR UR HELP......

I can answer some of your questions I believe.

2. If you mean air flow meter aka. VAF/MAF then yes they are apparently the same. If you have both, use the one that came with the engine just to make sure.

3. Your transmission should be fine, but powershifting isn't that good for the drivetrain components.

5. The stock figures are around 124hp w/ 114ft lbs torque

6. If you're a decent driver and then engine is tuned and running properly, then yes I think you should be able to be in mid 15s.

7. I'm not sure about CARB legal, but I know Genie has a header for the BP, there was a thread a little while ago about it.

hotrod0001 February-13th-2003 10:27 AM

I would recommend that in the near future you get an LX tranny because I know from experience that the stock sohc tranny is weak. (I blew mine with the stock sohc)

funkdaddysmack February-13th-2003 11:43 AM


Originally posted by hotrod0001
I would recommend that in the near future you get an LX tranny because I know from experience that the stock sohc tranny is weak. (I blew mine with the stock sohc)
That's not too common. The tranny can be used for B6T engines that produce more power and a lot more torque. If he can get the tranny from an lx cool, but if not he should be fine with the meager power levels of the BP.

itzkcatz February-13th-2003 02:05 PM

I would suggest getting a lx Transmission they can handle good power. Some people have had good power gains with the Na bp motor I think u can use the Rx7 Vaf sensor to get decent power gains and advancing the timing .. Not sure ..Jon

1ofdfew323 February-13th-2003 02:20 PM

thx for replying back.......
i just hope this car would be able to beat a stock 99 civic si or GSR stock! and still be reliable.
anyhow i just bought me a 15" circuit 8 today and im selling my 15" nissan se-r rims to tires name ur price i live in san jo...peace!

itzkcatz February-13th-2003 05:39 PM

If it doesnt beat a si civic strap a vj-20 on it and run some 13's ..Jon

Bruce95fmla February-14th-2003 01:56 AM

true that ,, you should be in the low 15's with that set up and remeber that the 323 is lightweight to ,, I am thinking of getting one , it would be my next project
Bruce

TheMAN February-14th-2003 02:10 AM

I don't think the stock 323's F tranny bellhousing will match up to the BP... anyhow, you'll need to figure out which engine mounts work, you'll need new axles if you're going to use the LX's tranny also. You might also need the subframe from the pro

there was one other guy who did the swap before... I don't know who it was... but he posted about it here before... you'll have to dig up his post and ask him what he did

Bruce95fmla February-14th-2003 12:07 PM

dru323 did the swap his email is here dru323@yahoo.com] dru323@yahoo.com][/EMAIL]

1ofdfew323 February-14th-2003 02:00 PM

i have e mailed dru long time ago and he always tell me to ask corksport and when i called corksport they told me to call back later which they told me twice....anyhow if there was only a mazda shop that would support my 323 needs down here bayarea cali i wouldn't call corksport.....u know whats a trip tho there's a trick. If u need help and and u want to ask corksport. do this ..pretend ur going to buy something and make it seem like u want to buy it then ask for what u need help at. ..well it worked for me twice and they were really nice at me..coo!

ANYHOW THANKS FOR EVERYBODY'S REPLY.....IM PRETTY SURE I GOT EVERYTHING WRITEN DOWN FOR THE SWAP NEXT WEEKEND....I WILL LET U KNOW ONCE I GET IT INSTALLED AND MY QUATER MILE TIME IN APRIL.......PEACE!

1ofdfew323 February-14th-2003 02:06 PM

shit!!! i need help .. im a computer illeterate. i want to post up my car pic but form some reason icant post it up . i dont know if im doing it rite or what...anyways i have a digital camera and i can only download it at my friends house and he emails me the pics then i down load it. so how can i post it up here please help ...thx

snart February-15th-2003 01:03 AM

Here's the link (i think) theMan was refering to.

BP 323

Good Luck!!!

funkdaddysmack February-15th-2003 09:49 AM


Originally posted by 1ofdfew323
shit!!! i need help .. im a computer illeterate. i want to post up my car pic but form some reason icant post it up . i dont know if im doing it rite or what...anyways i have a digital camera and i can only download it at my friends house and he emails me the pics then i down load it. so how can i post it up here please help ...thx
Forward the pics to my e-mail

funkdaddysmack at yahoo.com

I'll host them for you for a little while (meaning work will host them for you, hehee)


All times are GMT -5. The time now is 05:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands