Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   Wheel/Tires (https://www.mazda3club.com/wheel-tires-67/)
-   -   MZ3/MS3 RISHIE FITMENT GUIDe (https://www.mazda3club.com/wheel-tires-67/mz3-ms3-rishie-fitment-guide-44276/)

ARD MP5 April-29th-2007 02:01 PM

MZ3/MS3 RISHIE FITMENT GUIDe
 
Hi guys,

I'm still working on more details for this fitment guide. I just need to grab a few more different sized wheels and start playing.


VEHICLE USED: MAZDASPEED 3

OEM WHEEL SIZE: 18X7.0 +52.5 OFFSET
OEM TIRE SIZE: 215/45/17

BASELINE: MAZDA RX8 18X8.0 +50
TIRE SIZE: 245/40/18

This fit without any problems in terms of both Backspacing and frontspacing. I was enamored when seeing this.

http://www.autornd.com/catalog/album...X8-Wheel_1.jpg

http://www.autornd.com/catalog/album...X8-Wheel_3.jpg

http://www.autornd.com/catalog/album...X8-Wheel_4.jpg

http://www.autornd.com/catalog/album...X8-Wheel_7.jpg

ARD MP5 April-29th-2007 02:04 PM

THE FITMENT GUIDE: Beginnings of it
 
THEREFORE HERE'S MY BREAKDOWN BASED ON WIDTH OF WHEEL:

You have about a half inch more backspacing in the front and one inch of more room in the rear.

8.5 +50 with 245, might need a minor roll

8.0 +50 with 245 NP

8.0 +45 with 225 NP

7.5 +40

7.0 +35

This is simply from interpolation. I need to play around more and get some tires mounted on these wheels and into a lowered MZ3 with proper alignment settings.

Any help would be greatly appreciated. I'm in Milpitas, near San Jose.

Thanks, Rishie

ARD MP5 April-29th-2007 03:46 PM

Now depending on if you have Mazdaspeed or not your tire profile will change from what i see.

It also appears to me that the RX8 wheel with its OEM tire 225/45/18 should also fit with the MS3.

Can anyone tell me if the MS has more room than the MZ? I obviously haven't got a MZ3 over here to compare to.

BOOSTD 7 May-2nd-2007 05:47 PM

Post something looking for a regular Mazda3 in the area to try some fitments on ... there's probably somebody around who can help.

And are you ever going to sell that Probe :tool:

roddy May-2nd-2007 05:52 PM

i might be able to help out with any 3 fitments

ARD MP5 May-2nd-2007 05:55 PM

I think i got the standard MZ3 figured out.

The probe, ehh least of my problems. i did put the interior back in it though. just need to find door panels, put the battery back in the OEM location, change oil and hand it over to my mom or dad. i just wont' get shit for it and it has 80k on the chasis and like 30k on drivetrain.

rishie

ARD MP5 May-3rd-2007 08:47 PM

Ok so are mods and admins the only guys alive on this forum. What's up.

People where you at?

Post up ?'s you have on your cars and i'll do my best to track down answers or shoot them off the top of my head.

thanks, Rishie


All times are GMT -5. The time now is 06:53 AM.


© 2024 MH Sub I, LLC dba Internet Brands