Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   West Canada (https://www.mazda3club.com/west-canada-48/)
-   -   Edmonton: Caliper paint? (https://www.mazda3club.com/west-canada-48/edmonton-caliper-paint-23030/)

neuromancer March-26th-2003 04:17 PM

Edmonton: Caliper paint?
 
Well the uber paint job I did last got ruined by this winter. Strangely it is only the rear calipers that had problems, maybe something to do with snow and crap getting stuck between the steel wheel and the brakes...whatever.

So I am looking for good quality RED paint to repaint my calipers with. Last year I used Ford Red engine paint, which turned out to be really orangey, and obviously not very rugged. Any recommendations for something I can pick up locally? I would prefer non-spray paint, I'd rather brush it on.

Any tips for removing the flaking paint that is already there?

Jay

Snype451 March-26th-2003 07:00 PM

I would like to paint up my calipers this summer, so if somebody can suggest a type of paint (and maybe a good colour to go with my blue MP3 (laser blue, not dark midnight blue) I'm all ears

mesoh March-26th-2003 10:08 PM

some people (nick) would say that you should use tremclad, and they have have no probs thus far, but if i do it this summer, it will be woth foliatech..... i know they sell it at speedville, but shop around

neuromancer March-26th-2003 11:08 PM

Re: Re: Edmonton: Caliper paint?
 

Originally posted by 90&00 Protege

Brake fluid...ironically enough.

Good tip. I'll give that a try!

Jay

neuromancer March-26th-2003 11:12 PM


Originally posted by mesoh
some people (nick) would say that you should use tremclad, and they have have no probs thus far, but if i do it this summer, it will be woth foliatech..... i know they sell it at speedville, but shop around
Another member in EPC used Tremclad and his calipers are showing wear just like mine are. So I'd say that tremclad ain't the be all end all.

so where is this speedville place? I assume it is in Calgary?

Jay

Brycer79 March-27th-2003 12:38 AM

I heard oven cleaner works??? I have no idea if that is BS or not..

oh and for a laser blue yellow calipers would look cool

sandman March-27th-2003 01:28 AM


Originally posted by neuromancer


Another member in EPC used Tremclad and his calipers are showing wear just like mine are. So I'd say that tremclad ain't the be all end all.

so where is this speedville place? I assume it is in Calgary?

Jay

That would be me!! But I must say - I used the tremclad, but didn't prep the brakes like I should have (scrubbed with steel wool, cleaned till spotless etc..) basically just rubbed down with alcohol and called it good. I think if i would have prepped them properly, there might be even less wear than what's showing. Damn my laziness!!

I'm just gonna touch up the few spots that got worn down (looks far better than what happened to your brakes - mine's barely noticeable in comparison)

Tremclad owns!! 3 bucks for a little can that will last the lifetime of the brakes...

neuromancer March-27th-2003 09:29 AM


Originally posted by sandman


That would be me!! But I must say - I used the tremclad, but didn't prep the brakes like I should have (scrubbed with steel wool, cleaned till spotless etc..) basically just rubbed down with alcohol and called it good. I think if i would have prepped them properly, there might be even less wear than what's showing. Damn my laziness!!

I'm just gonna touch up the few spots that got worn down (looks far better than what happened to your brakes - mine's barely noticeable in comparison)

Tremclad owns!! 3 bucks for a little can that will last the lifetime of the brakes...

I'm not sure what the hell happened with mine. I THOUGHT that I prepaired them well. I think part of the problem was the paint was diluted (explains the color difference) and not as strong as it could be. But that wouldn't explain why the just the back had problems.

All I know is that I don't want to have to paint them again, too much of a pain in the ass.

Jay

skyhawk174 March-27th-2003 04:30 PM

I used Brake caliper cleaner and brake caliper paint. Mine still look good so maybe it makes a difference? I even have the smae winter rims as Jay so it must be working alright. I am changing back to my regular rims this weekend so I will have a look.

I bought the paint at JB's on Fort Road and Shane wil give you a deal there. It is called VHT Brake Caliper Paint.

I did notice that the paint on my dust shield is flaking off and there I just used regular auto body paint. I think this time I'll use a galvanize primer on it and repaint. Hmm, should not have done that shortcut.

Lots of work to do before the next show and shine. Mine engine looks like crap too.

neuromancer March-27th-2003 04:41 PM


Originally posted by skyhawk174
I used Brake caliper cleaner and brake caliper paint. Mine still look good so maybe it makes a difference? I even have the smae winter rims as Jay so it must be working alright. I am changing back to my regular rims this weekend so I will have a look.

I bought the paint at JB's on Fort Road and SHane wil give you a deal there. It is called VHT Brake Caliper Paint.

I did notice that the paint on my dust shield is flaking off and there I just used regual auto body paint. I think this time I'll use a galvanize primer on it and repaint.

Lots of work to do before the next show and shine. Mine engine looks like crap too.

What did the paint cost Chris? This is spray on isn't it? I'm hoping for something that goes on with a brush that I can find locally.

I'll have to do some looking...

Jay

zoom5 March-27th-2003 05:46 PM

Has anyone tried caliper paint? I think there are two types, spray and brush. Maybe that will do. I really dont know, never used it or know anyone that has. But it might be worth a try.

skyhawk174 April-10th-2003 03:47 PM

Gee sorry Jay, never got an email saying someone had replied.

As for the cost, I think I paid $8.00 per can at JBs and that is with our discount.

By the way, I checked my claipers last weekend when I changed my rims and they look fine. There are a few nicks but not too bad at all. I sprayed mine and put on 3 coats.

neuromancer April-10th-2003 03:56 PM


Originally posted by skyhawk174
Gee sorry Jay, never got an email saying someone had replied.

As for the cost, I think I paid $8.00 per can at JBs and that is with our discount.

By the way, I checked my claipers last weekend when I changed my rims and they look fine. There are a few nicks but not too bad at all. I sprayed mine and put on 3 coats.

Because I am lazy I don't want to have to spray the calipers (taking everything apart, or the masking would be a pain). I am hoping for a brush on solution :)

Thanks Chris!

Jason


All times are GMT -5. The time now is 10:07 PM.


© 2024 MH Sub I, LLC dba Internet Brands