I'm not familiar with the 2nd gen interior but it's probably similar. Pull off all the pieces, wire brush then to scuff them up so glue will adhere better, then glue down the fabric. Easier pieces (flatter ones) I was able to do but ones with curves are just too hard. You need a heat gun and someone who's good at this ****. The back deck lost the third brake light as fiberglass is being put in to smooth out the back deck. The dash too will have fiberglass to smooth out (lose) the vents over the AC vents, ashtray, and lighter. The only piece that is vinyl is the part underneath the cloth on the door panels. The cloth can peel right off when the door panel is ENTIRELY taken apart. There's foam underneath the vinyl but be careful not to pull off the foam.

Only thing I will be changing from the pics posted are the silver painted accents on the doors. Had them painted silver when I had some interior pieces painted silver as well but it's just too much going on. They'll be painted black to blend in more and have a cleaner look. I'll post final pics when all is done which will hopefully be before NOPI, that's my goal....we shall see.

 

Need I say more?