Gauging Interest: Adjustable Cam Gear for FS/FP Motor
1 Attachment(s)
Hi:
I'd like to find out if anyone is interested to purchase a pair of custom made AL6061-T6 adjustable cam gear for FS/FP motor (mazdaspeed protege, protege es, mp5,m6x, 626). If i have enough people interested , i'll go ahead and proceed. Stock pulley bar will be enough for 8 pieces. But, i can do more..if these is demand Target price will be from US200-US250 per pair. Potentially can go lower with more orders. :bigthumb: Payment : pre-paid via PAYPALL Delivery : via EMS from Malaysia.. (US$35) leadtime: 3 weeks ARO Color : Blue anodized (gear) and Magenta Anodized (insert) adjustable range: +10 thru -10 degrees Material : AL6061-T6 See the pic. This is the cad model of the cam gear. |
That's a nice target price, much better than the SR motorsports price as you must know.
Do you know if the shop has a way to get around problems with the magnetic cam position sensor that is over the exhaust gear? I know a shop in the US that was trying to design them had problems. |
Originally Posted by _Kansei_
(Post 384173)
That's a nice target price, much better than the SR motorsports price as you must know.
Do you know if the shop has a way to get around problems with the magnetic cam position sensor that is over the exhaust gear? I know a shop in the US that was trying to design them had problems. i designed this myself. it will not be a problem. I'll put cap screws to replace the "flags" on the camgear. r u interested. |
You have a PM.
|
haha shameless plug. i have some na twiggy sticks these would be perfect for.
|
authorized vendor?? Anyone else leery of sending money to Malaysia?
|
^^ he's pretty active on the 'other' forum, I recognize the name and the absolutely sweet lookin car.
If ford had sold the Lynx RS on here instead of the Focus.. yeah that would have been awwwesome. |
i'm not exactly a vendor
Originally Posted by Roddimus Prime
(Post 384255)
authorized vendor?? Anyone else leery of sending money to Malaysia?
|
I'll have to check with the forum owner. Overseas vendors is something not highly recommended because of the lack of legal options in case the vendor should steal the money (not saying you would...but it's happened).
I don't see a problem with doing it as long as all buyers are aware of the risks. You will need to send me a pm with your full name, physical and mailing address a contact phone number and an email address. When you post items for sale it helps to post actual pictures of the products to be sold. Good luck with it. Adjustable cam gears would be pretty beneficial...especially to those of us with j-spec cams. |
mmm I <3 my j-spec intake cam.
kasmankk -- Do you know if I could maybe assemble the exhaust gear such that I could use a cam pinned as an intake cam there? I've heard that the standard USDM intake cam, repinned for use as an exhaust cam, is nearly identical to either the JDM exhaust cam or the Mazdaspeed (impossible to find) exhaust cam. I'd have to research to make sure this wouldn't cause excess overlap since I'm turboed, but it would be good to know. The way that cad diagram looks, I could rotate the whole inner piece 90, 180, or 270 degrees, then from there have -10 to +10 degree adjustment.. I just haven't had my cam gears exposed recently enough to remember if the exhaust cam pinning is just 180 degrees off or something. Is the intake/exhaust gear the same piece? That would answer my question right there :) |
Originally Posted by _Kansei_
(Post 384271)
mmm I <3 my j-spec intake cam.
kasmankk -- Do you know if I could maybe assemble the exhaust gear such that I could use a cam pinned as an intake cam there? I've heard that the standard USDM intake cam, repinned for use as an exhaust cam, is nearly identical to either the JDM exhaust cam or the Mazdaspeed (impossible to find) exhaust cam. I'd have to research to make sure this wouldn't cause excess overlap since I'm turboed, but it would be good to know. The way that cad diagram looks, I could rotate the whole inner piece 90, 180, or 270 degrees, then from there have -10 to +10 degree adjustment.. I just haven't had my cam gears exposed recently enough to remember if the exhaust cam pinning is just 180 degrees off or something. Is the intake/exhaust gear the same piece? That would answer my question right there :) |
Fabrication in progress
The fabrication process is in progress.
I should get the 1st unit next week. I'll do test fit on the motor, and post the pics. They will not be anodized just yet. I need to make sure the dimensions are correct proir to that. Stay tune.:FIREdevil |
CamGear Prototype is in..check it out
I have received 1 prototype today. The machine shop was behind schedule. This unit is without finishing. I still need to do some fine tuning, before doing real engine test.
Color will be :- Gear : Black hard Anodized (cheeper color) Insert: Yellow or Orange (will pick most common color, for lower cost) And good news, i was able to get better pricing on this. 1 pair will be US245 , potential can go lower with quantity. Payment : pre-paid via PAYPALL Delivery : via EMS from Malaysia.. (US$35) leadtime: 3 weeks ARO adjustable range: +10 thru -10 degrees Material : AL6061-T6 https://www.mazda3club.com/forum/att...1&d=1184860449 https://www.mazda3club.com/forum/att...2&d=1184860449 |
Originally Posted by kasmankk
(Post 386541)
I have received 1 prototype today. The machine shop was behind schedule. This unit is without finishing. I still need to do some fine tuning, before doing real engine test.
Color will be :- Gear : Black hard Anodized (cheeper color) Insert: Yellow or Orange And good news, i was able to get better pricing on this. 1 pair will be US245 , potential can go lower with quantity. Payment : pre-paid via PAYPALL Delivery : via EMS from Malaysia.. (US$35) leadtime: 3 weeks ARO Color : Blue anodized (gear) and Magenta Anodized (insert) adjustable range: +10 thru -10 degrees Material : AL6061-T6 |
Cam Gear is here. Can place order now..
4 Attachment(s)
Pls check out the pics below.
The gear will be BLACK HARD ANODIZED (no options) The insert will be Gold Anodized, other colors (blue,red) also available but i'd recommend to stick to one color so that it will be easier to be made , and better pricing. As for the degree indicator, for the unit that you will be getting, it will be done with laser or silk screening process or engraving. It will be in white color, so that it is visible. FYI, on this unit, it was done with CNC, therefore cannot get very good resolution. The screw thread is using Stainless steel heli-coil. This is to ensure the thread will not be damaged . The Cam sensor flag on the cam gear, will be using chrome plated sockethead bolt. I have not install them yet on this. I've done a test fit on the engine (on my other engine). Everything fit perfectly. I'll try to install this on my car this weekend. 1 pair will be US245 Payment : pre-paid via PAYPAL (kasmankamis@yahoo.com) Delivery : via EMS from Malaysia.. (US$35) leadtime: 3-4 weeks ARO adjustable range: +10 thru -10 degrees Material : AL6061-T6 if you are interested, pls write you name and choice of insert color below: I wish to conclude this in 2 weeks time. Name ; insert color (gold,red,blue) |
Degree scale done
1 Attachment(s)
here the pic of the degree scale.
laser engraved. |
Tested and currently running
3 Attachment(s)
I'm ready to take in orders for the adjustable camgear (ex&in). The prototype is currently installed in my car. It worked perfectly , no interfence with the Cam Sensor.
Below are the camgear specifications:- 1. Material : AL 6061 2. CamGear finishing : BLACK Hard Anodized 3. Insert finishing : choice of GOLD, RED and BLUE 4. Degree Adjustment : 10 degree Adv and 10 degree retard 5. Degree Indicator : laser engraved , with 1 degree resolution 6. Bolts : Stainless Steel M6 , with SS heli-coil thread (on the insert) 7. Cam Sensor Flag Bolts : Chrome Plated Cap Screw (lock-lite in place) 8. WILL Not interfere CPS Selling GB price: US245 (prepaid) Payment Method : Paypal (kasmankamis@yahoo.com) Shipping and Handling : estimate US35, depends on location and mode of shipping. My recommendation is to use EMS , flat rate to most part of the world. Delivery leadtime : 4 weeks after GB order close. Pls put your names here, choice of insert color. Pls send me PM on your name, address, phone number and email. This is for shipping purpose. I'll inform your total using EMS or FEDEX. I'm hoping to conclude the GB in August 24. Name, Insert color , Location (city,State,Country) Example: 0. kasmankk , GOLD, Milpitas, CA , USA |
cleaned up.
|
Mmm, those are nice.
|
All times are GMT -5. The time now is 09:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands