FS: 2003 Mazdaspeed Protege Front End Drop Out
 

This is an updated thread from the thread entitled "2003 Mazdaspeed Changeover":

For Sale

Complete 2003 Mazdaspeed Protege Drop-Out. Includes the following:

-MSP 2.0 Engine (with engine cover)
-MSP 5 Speed Manual Transmission
-MSP Limited Slip Differential
-D & P side Drive Axles
-Callaway Turbo Manifold with Garrett Blower (includes all turbo components)
-Callaway Downpipes (both S and J pipes)
-Stock Intercooler with all intercooler lines and piping
-ECU and ECU wiring harness
-Front Suspension (Tokico Struts and MSP Springs)
-Front End Sway Bar
-Motormounts
-Shifter Assembly and Shifter Linkages
-Driver side and passenger side brake assemblies-- includes spindles, ABS sensors, brake lines, hub assemblies, rotors, and calipers
-MSP Subframe

This setup was dropped out of a salvaged title 2003 Mazdaspeed Protege that sustained totalable damage to it's mid passenger side. The front end was untouched. The car (and thus this setup) has 18,000 original miles on it. Everything was dropped out of the bottom and is still intact on the subframe as a whole unit. It is currently sitting on a pallet in my garage. I have a copy of the car's title and will include it with everything. This is an extremely clean drop-out. Buyer will pay shipping. Will only ship within the continental U.S.

$3800 for everything.

DO NOT P.M. ME ASKING ME IF I WILL PART OUT ANY MAJOR COMPONENTS, THIS INCLUDES THE TURBO MANIFOLD AND ASSEMBLY.

With that said, the only parts I will consider parting out is the suspension, possibly the sway bar, the brake components, the stock intercooler and the ECU. If you're interested in any of those parts, P.M. me and I'll give you a price.


Sidenote: I bought this setup with the intent on swapping it into my car. Due to time constraints, it couldn't have happened. This thread was up a few months ago. It was never sold in the short ammount of time I had to sell it before I returned to school for the Fall semester. Now that I'm on Christmas Break, I'm trying to get this taken care of finally.

More Pictures
 

More Pictures

I'd love to help you out man but it's probably priced a good bit higher than anyone is willing to pay. Most people with $4K to spend will just buy an aftermarket turbo kit.

I'm interested in the tranny and axles if you get an offer on the engine/turbo stuff.

PARTING OUT MSP FRONT END CLIP

So despite my efforts, it looks like I'll never get to sell this as an entire unit.

The following list is how the parting out will be broken down. It's divided up into several packages. Basically, top end, bottom end, turbo, etc. If you are interested in any of these components, please P.M. me, or email me at zcgtucker@yahoo.com

For those first time viewers, this is a front end clip from a 2003 Mazdaspeed Protege with 18,000 original miles on it. For more info, check the first page of the thread. The prices are somewhat flexible.

Package 1- $1800 (MSP Top End)
- 2003 MSP 2.0 Motor with engine cover
- Intake Manifold
- Throttle Body
- Intake Piping up to and including MAF
- Motormounts

Package 2- $1700 (MSP Bottom End)
- 2003 MSP 5 speed transmission
- 2003 MSP Limited Slip Differential
- 2003 MSP Driver and Passenger Side Drive Axles
- Shifter Linkages and Shifter Assembly

Package 3- $1800
-The Entire Turbo Assembly. This includes everything (and including) from the exhaust manifold all the way down to the J pipe. It even includes the oil lines and the electronics.

Package 4- $250
The Intercooler with all the IC piping

Package 5- $200
- The Suspension: The two front tokico struts with the MSP springs.

Package 6- $100
- The MSP front end Sway Bar

Package 7- $450
- The ECU and the ECU wiring harness

Package 8- $250
Both Driver and Passenger Side:
-Spindles
-Hub Assemblies
-ABS sensors
-Brake Lines (with U clips)
-Rotors
-Calipers

PRICE LIST UPDATE

For those first time viewers, this is from a 2003 Mazdaspeed Protege with 18,000 original miles on it. For more info, check the first page of the thread.

Package 1- $1400
- 2003 MSP 2.0 Motor with engine cover
- Intake Manifold
- Throttle Body
- Intake Piping up to and including MAF
- Motormounts

Package 2- $1200
- 2003 MSP 5 speed transmission
- 2003 MSP Limited Slip Differential
- 2003 MSP Driver and Passenger Side Drive Axles
- Shifter Linkages and Shifter Assembly

Package 3- $1800
-The Entire Turbo Assembly. This includes everything (and including) from the exhaust manifold all the way down to the J pipe. It even includes the oil lines and the electronics.

Package 4- $250
The Intercooler with all the IC piping

Package 5- $200
- The Suspension: The two front tokico struts with the MSP springs.

Package 6- $100
- The MSP front end Sway Bar

Package 7- $450
- The ECU and the ECU wiring harness

Package 8- $250
Both Driver and Passenger Side:
-Spindles
-Hub Assemblies
-ABS sensors
-Brake Lines (with U clips)
-Rotors
-Calipers

Front End Clip is now for sale on ebay.

Only one bid has been made thus far for $1,800

There is still 2 days left. Here's the link.

http://cgi.ebay.com/ebaymotors/2003-...QQcmdZViewItem

Very interested in your Engine and Transmission packages, are they still up for sale?

trans deal still here?

pm'd for struts