I have been having massive trouble finding a part for my 2002 Protege5, you may be able to help me.
I am looking for the mounting bracket for the brake caliper for the left rear. The dealer can only order the caliper, or the entire brake assembly (from what they are telling me), and the mounting bracket is unorderable from every parts store i am finding up here. Proteges are rare enough as well, that I haven't found any luck in junk yards yet. Shipping to 02915 While you are at it, toss me pricing on the caliper as well, since I haven't ordered that yet either. |
The bracket comes included in my caliper kit. I suggest you visit your local NAPA and ask them for"
SDC 24262226 It'll be about $80+55core. |
Originally Posted by njaremka
(Post 380199)
i have the 626 v6 front set-up on my car and the stock protege ES rear brakes. can i get a price for front rotors for the 626, and rear rotors for the ES?
|
no, you just didn't give me enough information to look it up accurately. they made more than 1 model of 626 throughout the years.
|
geez.....
the fronts are the 2001+ (i assume) 626 V6 set-up, the rears are stock 2001 ES / MP3 set-up. i was also under the impression that the front rotors are the smae as equipped on the mazdaspeed protege's |
Yeah the rotors are a direct swap, and pads can work between the two but from what I recall seeing, the 626 pads have more surface area than the stock MSP pads (they go all the way down to the rotor hat).
|
Originally Posted by _Kansei_
(Post 380650)
Yeah the rotors are a direct swap, and pads can work between the two but from what I recall seeing, the 626 pads have more surface area than the stock MSP pads (they go all the way down to the rotor hat).
i don't need pads, just the rotors - going to go with Hawk HPS pads. |
Yeah I knew someone that needed pads badly on their MSP (bad enough that he had to get them locally) and he had to go with ES pads.
|
how much can i get a k&n full cold air (typhoon) for a 07 mazda 3i
|
Originally Posted by Roddimus Prime
(Post 380628)
The bracket comes included in my caliper kit. I suggest you visit your local NAPA and ask them for"
SDC 24262226 It'll be about $80+55core. I contacted 2 of my local NAPA Autoparts stores, and neither had it, and said they would have to order it. Then they checked wharehouses, and reported that no NAPA wharehouse has it either. The dealer wants $483 for the same pieces, so trying to avoid going through them. Do you have a work-around for this by any chance? maybe have one in stock? If not will put up a thread here looking for help from owners. |
Originally Posted by njaremka
(Post 380640)
geez.....
the fronts are the 2001+ (i assume) 626 V6 set-up, the rears are stock 2001 ES / MP3 set-up. i was also under the impression that the front rotors are the smae as equipped on the mazdaspeed protege's |
I'm no longer offering anything anymore. I've left the company and no longer do business with them. Sorry.
|
sold your MS6 and quit your job? jesus man havin an early mid life crisis?
|
he's eloping to Georgia! (well.. probably not)
|
I used to be in an "acquiring phase" of my life. Now I'm in a "simplification phase".
The less crap I have to pay for the beter off I am right now. napa was fine but apparently I didn't live up to their expectations. |
All times are GMT -5. The time now is 02:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands