|
Holy hell dude .. you have a LOT of parts!!
|
I'm interested in the AWR front lower control arms --wasn't even aware that they made those!
Yes, I want pillow ball for my front suspension.. on my city daily driver car --I'm out of my mind :P |
Originally Posted by _Kansei_
(Post 394995)
I'm interested in the AWR front lower control arms --wasn't even aware that they made those!
Yes, I want pillow ball for my front suspension.. on my city daily driver car --I'm out of my mind :P http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA TTL Thanks, Dave |
Originally Posted by KrayzieFox
(Post 394962)
Holy hell dude .. you have a LOT of parts!!
http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA Some more pis of stuff for sale http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA |
What coilovers are those, and how much?
Also, how much use on them? |
Originally Posted by J-Protege
(Post 395020)
What coilovers are those, and how much?
Also, how much use on them? I'm asking $920.00 which is half for what AWR wants for a similar set of Coil-overs new http://www.awrracing.com/pages/store.html. I'll not sale them with out the camber caster plates as they where special machined/fabed by Tony at AWR to fit properly with the Bilsteins. The plates are $120.00 for the fronts made by Ground Control and $100.00 for the AWR rears http://www.awrracing.com/pages/store.html this does not include the special valve work or machining I had done to set it all up. The suspension has only actually seen less then a dozen events so they are practically brand new. The events where a few Time Attacks and Hill-climbs it lived on a trailer or in the shop the rest of the time. SO the total time the car was operated with the coilovers /suspension was less then 10-15 hours. For the Coilovers (struts springs camber caster plates) I’ll take $1150.00 shipped with in the 48 states. And as a bonus I’ll throw free in either a set of AWR adjustable front sway bar end links or a Corksport front strut bar to you ever buys the coliovers or front control arms. http://shim1.shutterfly.com/procgser...0AZtGrNk0ct2LA |
ok now i'm gonna cry....the ultimate 1.6er is dead !
|
Wow, these are some serious race car parts! May be out of my league right now, but I'll let you know :)
Sorry to see it go, but I respect the commitment it must have taken to build and work on this car. |
bump
|
GT Spec subframe braces front and rear. How much?
They should fit all 3rd gens including the P5 right? |
Originally Posted by Lilredwagon
(Post 396045)
GT Spec subframe braces front and rear. How much?
They should fit all 3rd gens including the P5 right? |
ok, thank you
|
Stuff left for sale
What I left For Sale
A ACT stage 2 four puck clutch with a new clutch plate and new throughout bearing and I’ll include a stainless steel clutch line for free. $100.00 USD plus shipping. http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA A full set of modified motor mounts left and right are made by AWR the front and rear are injected is polyurethane included is a reinforced front sub frame cross member $100.00 USD plus shipping. The rear drum to disc Wilwood big brake kit $500.00 USD plus shipping. http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA A B&M short shifter with a Kart boy Sliver knob and shifter bushings $100.00 plus shipping. A Fiber Images (no longer made) EVO style Carbon fiber hood with Redline hood struts and hood pins $200.00USD plus shipping and a AWR Carbon fiber dash replacement $50.00USD plus shipping. http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA AWR fabricated lateral links set and the two trailing arms all with adjustable spherical heim joints and the spacers needed to custom fit the kit to the rear suspension of a 3gen Protégé I’m asking $250.00 USD plus $20.00 for shipping. These are not the ones you see on AWR’s web site they are much beefier with more adjustment available for toe and camber. These allowed me to run the 16”x9” wheels with 225 width Hoosiers. New they would be around $500.00 USD from AWR. http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA AWR front control arms which make a great complement to the rear links and arms. I'm asking $300.oo USD for both plus $25.00 for shipping. Which is less than half price if bought new from AWR. Plus you get the special pin and collar ball joint for bumper steer / camber gain correct which is extra from AWR. The new with the ball joints it would be over $800.00 USD. And they only say about a dozen events just like the rest of the suspension. There is a few nicks in the powder coat form when I had to replace the broken axles and when I had to but in a transmission. They are a reinforced so there is no deflection with all spherical bearings instead of rubber bushings and of coarse the pin and collar special ball joint (outer pickup point) to correct bumper steer and camber gain on a lowered car. I'll ship them with all the hardware from my car and I'll throw in the AWR front adjustable sway bar end-links for FREE, form AWR they would coast $80.00 USD. http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA http://im1.shutterfly.com/procserv/4...0AZtGrNk0ct2LA Lastly I have a ZM 1.6 short block and a F series manual transmission also for sale but only if you pick it up cheap very cheap. Thanks, |
1.6 Parts plus 3Gen Suspension FS Update as of 12/26/07
1.6 Parts plus 3Gen Suspension FS
-------------------------------------------------------------------------------- Update as of 12/15/07 09:27am Be sure to check back often as items are added soon I may have some Auto-meter phantom gauges available. Also if you have or know someone that has a GD body 02-05 Subaru WRX/STI I have several items for sale. All is first come first serve. Payment accepted via Paypal only. You supply me with your address and I'll send you a quote for shipping via UPS ground insured. Once sale is agreed upon I'll send a invoice to your paypal account id for payment. Once payment is received I usually try to have items shipped within three business days. I'll provide you with a UPS tracking number as soon as possible. B&M shifter with Kartboy silver knob and bushings $100+shipping working deal but no payment recived as of yet. I have three stainless steel exhaust flanges for DIY header left. $80 plus shipping. A set of rear APC carbon fiber look rear taillights. Make offer plus shipping A set of APC carbon fiber look mirrors manual adjustment. Make offer plus shipping And couple of rear CF wings/spoilers one that's straight and one that is 3D in shape and type. Make offer plus shipping LTB bolt on steering wheel quick relase (best and most secure in the business) $70.00 plus shipping MOMO Mod 08 3-spoke has a very deep dish of 90 mm to place the steering wheel closer to the driver for improved comfort while racing black suede and back center spokes $80.00 plus shipping http://us.st11.yimg.com/us.st.yimg.c..._1979_30123782 AWR carbon fiber dash replacement for Racing only! Has wing-nut dzus fasteners installed and trimmed around HVAC area. This is a race part intended for weight reduction in race cars which need to keep a stock appearing dash. It should not be used for any street applications. Expensive to ship ref http://www.awrracing.com/store/produ...products_id=57 $100 plus shipping http://shim1.shutterfly.com/procgser...0AZtGrNk0ct2LA Local pick up only used but good condition ZM 1.6L short block, F25M-R series manual transmission minus ring gear, modified steering rack with heavy duty aluminum radius rods and heim jointa for rod-ends includes an adjustable bolt at spindle for making bumper steer corrections make reasonable offer LOCAL PICK UP ONLY. For YOUR ENJOYMENT The following pictures are what she looked like the weekend before she was dismantled 09/08/07. ;( For picture references a lot of the modifications that my little 99 1.6er went though over the years may be found here: http://biknman.shutterfly.com/action/ under the album Mazda Race Car Enjoy! http://shim1.shutterfly.com/procgser...0AZtGrNk0ct2LA http://shim1.shutterfly.com/procgser...0AZtGrNk0ct2LA http://shim1.shutterfly.com/procgser...0AZtGrNk0ct2LA http://shim1.shutterfly.com/procgser...0AZtGrNk0ct2LA http://shim1.shutterfly.com/procgser...0AZtGrNk0ct2LA http://shim1.shutterfly.com/procgser...0AZtGrNk0ct2LA http://shim1.shutterfly.com/procgser...0AZtGrNk0ct2LA http://shim1.shutterfly.com/procgser...0AZtGrNk0ct2LA Thanks Dave __________________ David Potter 99 Protege 1.6L Turbo Parting Out all For Sale see pics at end of album in link below 03 WRX Wagon 500 WHP at 24 psi 03 Dodge Ram Hemi “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.” ˇ Ernest Hemingway http://biknman.shutterfly.com/action/ -------------------------------------------------------------------------------- |
| All times are GMT -5. The time now is 10:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands