MS3, California emissions and Cold Air Intake?
I need some help.
I bought my MS 3 in September and ordered the MS cold Air Intake. I was told Mazda engineering had put a hold on it. Last week I read that they were available again so I called the dealer. They told me it was available .....but it was not California emissions approved. I checked the website again and saw that it was listed as emission approved in all 50 states. So I called again and got the service parts manager on the phone. He explained that my MS3 has california emissions on it and the CAI that is on the website will not fit it. Has anyone who lives in California heard of this? Has anyone in California been able to get a CAI from Mazdaspeed that fits? Does anyone know if this is true and there is a difference between cars with and without Cal Emissions? I would like to keep the warranty so that is why I am not going aftermarket. If I do go aftermarket, does Cobb or CP-E have any issues fitting a car with Cal Emissions? Any help would be appreciated |
I remember reading that the Mazdaspeed intake for the MS3 has been discontinued for a number of reasons. Maybe CARB approval is one of them. Hydrolock definitely is.
Have you looked into Injen intakes? http://www.streetunit.com/Injen_Cold...3_p/sp6062.htm When I bought one for my Protege5, they were carb "pending" like the MS3 one is now. In a few months the one for the MS3 will be legit, but until then, you won't get a ticket because it's pending...at least that's how it worked with mine, back in '03. I've never had a problem from the law with my Injen. :) I also just kept my stock intake for the service dept. to see if I ever found myself at the dealership for anything...which I never did and my stock stuff is still brand new, sitting in a box. |
As a Mazdaspeed dealer, I can confirm that the Cold Air Intake for the Mazdaspeed 3 is still on hold and is not available for sale. We have been in contact with Mazda and they have yet to update us with any new information on to when a CAI will be available.
As far as being CA Emission compliant, according to MazdaUSA.com the MS CAI meets the standards of all 50 States. Chris www.buyourmazdaparts.com www.azmadaparts.com |
Thanks Chris,
See the attached link. http://www.mazdausa.com/MusaWeb/spee...ModelYear=2004 If Mazda has the part on hold, then why is it offered on the web site? Per the web site and my dealer said this is the correct part for MS3 with out the Cal emissions and they are shipping. They said it simply won't fit a Cal emissions MS3. Thanks for your help. |
It'll fit, but forget about your warranty.
It's still on the site, because it's been taken off the shelf in the last couple months. People are hydrolocking their engines and Mazda doesn't want to give any more free motors away so they're changing the design of the CAI. |
Cai Ms 3
Originally Posted by Artfuldriver
(Post 406796)
Thanks Chris,
See the attached link. http://www.mazdausa.com/MusaWeb/spee...ModelYear=2004 If Mazda has the part on hold, then why is it offered on the web site? Per the web site and my dealer said this is the correct part for MS3 with out the Cal emissions and they are shipping. They said it simply won't fit a Cal emissions MS3. Thanks for your help. As of 9:50am Arizona time.... these cold air intakes are still being held for inspection as per mazda. This part# GRMS-8M-L29 is the exact same number they have had for this part since its development. So, it has nothing to do with CA emissions. It is simply not available for sale at this moment. We will keep you updated as we find out new info. Thanks and happy holidays! Ray |
One thread:
http://www.mazdas247.com/forum/showt...EL#post3102215 Two thread: http://www.mazdas247.com/forum/showt...=cai+hydrolock A quote from here:
Originally Posted by eg6motion
(Post 4018698)
the mazdaspeed intake is being redesigned because its known to cause CEL's. Probably not a wise choice to purchase the old one. Warranty or not, its about the worst intake you could buy for your car. Nearly all others are safer.
http://www.mazdas247.com/forum/showt...aspeed+cai+cel |
Originally Posted by eggynatey
(Post 406822)
It's still on the site, because it's been taken off the shelf in the last couple months. People are hydrolocking their engines and Mazda doesn't want to give any more free motors away so they're changing the design of the CAI.
|
Originally Posted by eggynatey
(Post 406835)
Three: (I could keep going, but...yeah)
|
MazdaSpeed 3 Cold Air Intake RETURNS!!!
Hi speed lovers!! Well finally the re-release of the cold air intake for the Mazdaspeed3 & Speed6 has come! We have the Speed3 CAI on sale for $299.00 with FREE SHIPPING to US & Canada! Just click on the link below!
http://www.buyourmazdaparts.com/inde...t_detail&p=664 |
Originally Posted by Ryz
(Post 408108)
Keep going with what? Posting links to opinions and no facts, impressive.
I could keep going with thread after thread of people who have had problems with the Mazdaspeed CAI on their MS3. Opinions, experience, call it what you want. A lot of, if not most people are not happy with that CAI, and that's fact. |
Originally Posted by eggynatey
(Post 408191)
Opinion that he got a mystery CEL after installing the intake? Opinion that the fuel pump had to be changed and the ECU reflashed? Did you even read the links?
I could keep going with thread after thread of people who have had problems with the Mazdaspeed CAI on their MS3. Opinions, experience, call it what you want. A lot of, if not most people are not happy with that CAI, and that's fact. |
Cai
The part number for the MS CAI has been turned back on, order away...
|
Hhow much power will this add?
|
Originally Posted by doctorjedi
(Post 408920)
Hhow much power will this add?
|
All times are GMT -5. The time now is 04:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands