Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   Mazda3/Mazdaspeed3 (https://www.mazda3club.com/mazda3-mazdaspeed3-98/)
-   -   Miss at Idle 06 2.3 engine (https://www.mazda3club.com/mazda3-mazdaspeed3-98/miss-idle-06-2-3-engine-43920/)

vancer March-1st-2007 07:06 PM

Miss at Idle 06 2.3 engine
 
My 2.3 3 (with only 6 k miles on it) started to experience a bit of a miss at Idle. Only when cold and only after running for about 2 or 3 minutes. Dealer went over it and simi-fixed it but seems to have returned. After it is somewhat warmed up it is fine. :rolleyes:

bumading March-1st-2007 09:41 PM

try run engine using different air filter or with no filter for a little bit or maybe there is something wrong with spark plugs?

TurboFC3C March-7th-2007 09:37 PM

I'm having the same issues also.

vancer March-9th-2007 08:43 PM

Miss
 
About how many miles on your car? ------ 2.3 engine?

t24u March-10th-2007 01:46 AM

I will try to search on a tsb for this, let me see what I can dig up.

t24u March-10th-2007 01:51 AM

Here ya go everyone, there is a TSB, only for CA spec though. Not sure if it applies or not, a simple reflash of the ECM fixes it. Here's the TSB number and a quick explanation of it.

TSB: 01-031/06
2006 MAZDA3 WITH 2.0L/2.3L (CA SPEC ONLY) - ENGINE HAS ROUGH IDLE AFTER COLD START
APPLICABLE MODEL(S)/VINS

2006 Mazda3 vehicles with 2.0L/2.3L (CA Spec)
DESCRIPTION

Some vehicles may exhibit a rough idle for 5-10 seconds after a cold start. It may happen after filling up with 87 octane gasoline and then parking overnight. There is no DTC stored in PCM memory and fuel holding pressure is 36.2 psi or more. This is due to a sensitive PCM calibration to specific local gasoline quality.

vancer March-11th-2007 08:22 PM

Miss in 2.3
 
The above is interesting but mine is not a CA car. Also mine only has this miss (not really a rough idle) after it has been running for about 1-2 minutes. Strange :pat:

t24u March-12th-2007 03:12 AM

It's worth a try. It may indirectly fix it.

It sort of "resets" the PCM when you re-flash it with a newer calibration. So then, it has to "re-learn" everything.

vancer January-29th-2008 07:07 PM

still has the miss
 
Have had my 3 with 2.3 engine to two differnent Mazda dealers. Neither can fix the miss or know what is causing it. i called the tech hot line and they do not know either. Hmmmmm?

tundra914 January-30th-2008 06:20 PM

My 08 MZ3 does the same thing for the first 2 minutes but goes away after warming up. My 07 Subaru does the same thing too when cold. I thing its normal.

vancer January-30th-2008 06:47 PM

How about that?
 

Originally Posted by tundra914 (Post 399387)
My 08 MZ3 does the same thing for the first 2 minutes but goes away after warming up. My 07 Subaru does the same thing too when cold. I thing its normal.

==============================
tundra, Interesting but wonder why neither dealer or even the Tech rep would say it is normal for this engine? Oh well, I will keep you posted. :)


All times are GMT -5. The time now is 10:59 PM.


© 2024 MH Sub I, LLC dba Internet Brands