Welcome to our new section
Mazda Service Info is a new section I'm making to help the spread of knowledge to us owners who wish to be "in the loop".
"Snap-on" is a mazda service manager and really wants to help grow the community. Because of his ability to provide us with current info and his obvious experience with our vehicles I'm making him the moderator of this section. It'll be used as a tech section to store and catalog various recalls, warranty issues and dealership updates. This is yet another forum asset. Let's all thank him for his time and willingness to share with us when others do not extend their hand to our communities. |
Nice idea! Good way to keep up to date with any problems that are announced, especially for those with newer models like the 3, 5, and 6!
|
Yea, good idea ...
Hey, since snap-on is a Mazda service manager, you think he'd be interested in 'running' the same type of forum on www.rx8club.com ... and in the near future when I get the Mazda 6 forum up and running? |
very possible. I'll ask him and see.
|
Originally Posted by BOOSTD 7
Yea, good idea ...
Hey, since snap-on is a Mazda service manager, you think he'd be interested in 'running' the same type of forum on www.rx8club.com ... and in the near future when I get the Mazda 6 forum up and running? http://www.rx8club.com/member.php?u=8824 |
hahaha! yeah www.rx8club.com www.rx7club.com are also owned by Ryan "boostd7"...as-is RX Tuner magazine!
|
Great idea! I'm here to help as well if anyone needs any information. Nice to know there is a service manager here too! I think it will help your community.
|
Hey I just got a new mazda 3 and I want to know whare to find the spark pluggs at?
|
Originally Posted by radrandy911
Hey I just got a new mazda 3 and I want to know whare to find the spark pluggs at?
wrong section for this question, but they would be under the plastic engine cover on the cam cover....I believe you will see 2 wires with boots and 2 coil packs bolted to the cam cover |
I am trying to replace the wheel bearings on my wife's '03 P5.
Any tricks or tips to remove the wheel hub locknut?!! I just can't seem to break it free. If there is a thread on this would appreciate any help. Thanks, Rick h |
A long breaker bar and stand on it. Of course it helps if you're 260lbs.
|
I'm a scrawny 140 lbs. and I managed to do it with a long enough pole. A strong breaker bar, and a 4 ft. hollow steel pole will do the trick. With a big enogh lever, you can get enough force to lift/break free just about anything ...
|
Some WD-40 usually helps. If not, try pouring some motor oil it - helps a lot.
|
If i can provide any additional info no Mazda vehicles i will do so. I'm a Tech for Mazda in Corner Brook, Newfoundland, Canada.
|
NFRanger, any word on a re-flash to fix the fuckups with the flah I got on the MS6?
|
Fuel Pump woes
---'99 Protege w/ 1.8L, 5spd, has 2" exhaust, had K&N cone 'till 30ooomiles ago---
I am having problems with what I believe is my fuel pump (again). The unit was replaced under warranty when the car was about 2 yrs old. I now have 180oook (110ooomiles) and it looks as if I might need another. At 3000-3750 rpm, 2/3 to full throttle, gears 3 to 5, the car stumbles. Worse at 1/2 throttle in 4th & 5th. Sometimes wont even keep highway speed. Will idle day & night, no wierd noises Are the fuel pumps a common replacement...2 in 120ooomiles of sevice? (a Q for the Service guys) How do I go about attaching a fuel pressure gauge? I cant find a shraeder valve, so I am lost (I'm use to the now Lo-Tech or use-to-be-Hi-Tech systems :doh: ) Could the P0240 (Cat below efficiency) codes I erased 2x in the last 3wks to a month be related? Other areas I am checking include the I-coils & o2s :dunno: |
Sounds like your cat is plugged. Is that the only code that you have? Do you have any o2 sensor codes?
|
Did you get the flash for the "loss of power" problem? What did it do differently after the flash? You can re-program the PCM to the factory settings before the flash, using something called "as-built" data. The only way to obtain this data is through Mazda Technical Support. The only problem with that, is it removes all the fixes that the flash included.
Mazda is great about offering new reflashes continuously throughout the year, the latest reflash will have the new fixes plus all the old ones.
Originally Posted by Roddimus Prime
NFRanger, any word on a re-flash to fix the fuckups with the flah I got on the MS6?
|
Replaced Clock Display & Muffler Hangers
Within 5,000 miles I had the dealership replace my muffler hangers because the thing was swaying a good three inches to each side. This fixed the problem for the most part.
At 25,000 I just had the clock display replaced because about once a month, the time would jump back about a half an hour. Working fine now. |
have you ever had anyone complain about vibration in front floor boards or tire howling at speeds 45 or higher? sure like to get answers to these blaffling problems, as my dealerships here in mi. tell me this is a common problem with the mazda3s (2005) is this true?
|
Filter Wrench
so can I stop my local snap on dude for a oil filter wrench for my mazda3. plan to do my own oil changes from now on, I cut the opening in the plastic cover(belly pan) so I DO NOT HAVE TO KEEP REMOVING IT!! WHAT A PAIN IN THE ASS TO DO THAT!!!:crook:
|
Hey folks, I'm new to the site. I have a 04 Mazda 3 with heating problems. I came across the post below from this site. There was no response to his post. I would really like to find out if he fixed his problem or not. My problem is exaclty as he posted, right down to the gurgling.
Would any of you have any ideas that I can try. Hello all. First time on the board and I am looking for some assistance on (the only) problem I have had with my 2004 Mazda3s 5 door. In a nutshell, the car blows cold air at idle even after the engine is warmed up. Living in New England, that means that when you start your car to warm it up, it will always blow cold air until you begin driving, no matter how long the car has been running. At 1700 RPM's or above, the heat blows normally but when you stop in traffic or at a traffic light, it simply blows cold air again. I have had Mazda look at it and they said it may be a blown head gasket ( a tiny head gasket leak) but when a test was done running 170lbs of air through each sealed cylinder, no bubbles were observed in the coolant recovery tank. Also, I haven't noticed any coolant los or white smoke typically associated with a head gasket problem. I hear air gurgling through the HVAC system when I am driving and I have had the cooling system "burped" three times to remove any air pockets if that matters. The car was in an accident before I bought it, and I am cool with that and all since it was fully disclosed, and it now has 44K miles on it. I do know that the water pump was replaced, or I was told it was, and I have had every hose checked and rechecked as well as a new thermostat. Also, and very important, the engine does not overheat or even run hot. The gauge is where it is supposed to be. |
Hello guys, i just got me a 2007 mazda 3 as you can see in the pics, i drop 17's, HID's, LED's inside the car, tints, and im actually looking for ideas... now my car is stock, can you please help me find parts or websites where i can get parts specificaly for my car... thank you for your time...
|
good job
|
Agree good
|
Mazda rx8
Hi, I recently joined your forum cause I could not find any Mazda RX8 Club in the phils. (for obvious reasons). Is this club limited to Mazda 3 owners only? Will there be a space for RX8 owners at this forum? I wanted to know more about this RX8 I recently bought. Hope there are fellow RX8 owners in this thread.
Thank you. norman |
You're more than welcome to hang out here, Norman, but there will be a lot more info for you at www.rx8club.com
Pretty cool buncha guys |
Originally Posted by Hugomvlqz
(Post 410076)
Hello guys, i just got me a 2007 mazda 3 as you can see in the pics, i drop 17's, HID's, LED's inside the car, tints, and im actually looking for ideas... now my car is stock, can you please help me find parts or websites where i can get parts specificaly for my car... thank you for your time...
|
snap on
Thank-you
|
Goodmorning from sunny Cyprus
I have a mazda familia 1500cc model of 1999 and it has 219464 Km on its conter. But i have a problem with the hold button. It flushes on at any time and the car goes crazy. What i can do? I changed the oil and the filter of the gearbox what i can do else?
Thank you... |
You like the Mazda6 concept car? i thought it was too unrealistic. yea i know concepts are suppose to be crazy but how are they suppose to make a production model based off of this while keeping it affordable and looking somewhat like the concept and you new section of talking is good.
|
Yes, I also believe that its nice idea
|
All times are GMT -5. The time now is 06:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands