Vacuum lines for Zex install on Pro5
 

I recently got a used dry Zex kit.

I'm having some problems figuring out where the vacuum lines connect to.

Here's what I'm thinking.

On the Nitrous Management Unit (NMU) there are two barbs in question. One is labelled "Regulator" and the other is labelled "intake".

On top of the fuel rail there is a vacuum hose that connects the fuel pressure regulator to another part.

Do I:
Connect the "regulator" hose directly to the Fuel Pressure Regulator. "Intake" connects to the other part the Fuel pressure regulator was connected to. There are no taps.

Am I correct?
If anyone can show a picture of this specific part of the Zex install I would appreciate it.

Sorry to see that you picked up a dry kit...they are dangerous w/ our cars...You should call up Zex Direct for information!!

Chas