Intruder

type S 6.5" is OK though

purpose

Good to know... Sir.
If nothing else i'll have the
generous infomation you have
provided.
On another note you say that
the sedan have speaker cutouts
in the rear doors, but no speakers.
I haven't took the doors off yet.
But I know there is a pair of woofers
underneath.
I have a 03' LX. I'm guessing it's
midbass, as only low notes generate
from the speaker.

asylum24

Type S's are also not as deep(length wise) I had my 6.5's and had hte windows up and was like "Woorah!" and hten I got in to drive around, drove around, rolled hte windows down and they stopped about 2 inches above hte door... i was pissed tehy soudned nice too... and I drilled holes for the tweeters in the window sail thing for the mirrors and I oculdnt even use em..

cdoyle

Hi,
I have a friend who has a 2000 Protege ES with the 'Premium sound in it right now (the CD and Tape double din size thingy).

She wants to put in a aftermarket deck, so according to the chart above.

The wiring harness I need is either going to be the
Metra: 70-7901
Scosche: MA02

and the kit I need will be either
Metra: 99-5510, 99-5512, or 99-5700
Scosche: FM2157

Are those the correct numbers for her car and system? which do you guys like better Metra or Scosche?

Are the special tools needed to remove the factory deck in that year?

Thanks
Chris.

Sir Nuke

Purpose....please report back on this....as to my knowledge the standard DX, LX, and ES do not have speakers in the rear doors...but DO have them on the rear deck.

the reason the doors have the cuts outs is the fact that the rear doors on the sedans are the EXACT same doors that are on the rear of the P5....and the P5 has rear door speakers.

iamcacophobic

i cannot figure out how to remove the stock radio from my 2002 protege 5. i have tried the how to guide you have and it still wont go. so how far in are the 2 "c" shaped rods supposed to go in untill i get to the release pin?

purpose

You gotta deal Sir.
I'm offshore right now, I'm due
back in on the 17th. I'm make
it a priority to confirm this when
I arrive home with a picture, if I
get my hands on a digital. I'll for
know for sure when I place in my
deck. It's getting lonely outhere...
19 down 9 to go...

Sir Nuke

hello iamcacophobic and Welcome to our happy little corner of the net, and to our Club. There are TWO BIG fridge'S in the corner with anything you can think of in them...help yourself...of course only take what you can LEGALLY have.

make yourself at home on one of the big fluffy couches, kick your shoes off, put your feet up on one of the tables, yes we are allowed to do that, mom don't care....and take it easy.

oh...btw....every once in a while a food fight breaks out...so you may not want to wear nice clothes here.

Welcome!!


the "keys" on the side go in about 3/4 to 1 inch.....as I remember.

if you are having trouble with the HOME MADE tools...as they work but are not PERFECT...you can go to somewhere like Walmart or Autozone and get TWO pair of the FORD U shaped headunit removal tools. IF you do that...one end will be inserted into the small hole and the other end will stick into the oblong opening in the middle between the two round holes. but only the end that goes into the ROUND hole actually engages anything. a pair of the ford tools cost about 4 or 5 bucks...so you would be out 8 to 10 greenbacks.

cdoyle

I'm about to go get the harness and kit for my friends protege, are the ones I listed above the correct ones for her car?

thanks
Chris.

Romp03

Sorry... I felt like it....

1st MP3 in NH

was there a point to that or were you just being an *** Clown?

Romp03

Hey, look, I've been ask to test the admins of the forum, I have to see how much time they'll take to remove the post...

I would of not do that..

C yah

1st MP3 in NH

you should try that over at www.protegemp3.com and see how long it takes

AVERAGE

ahh, smell the hate for the bf (kicks car)

chrishawthorne89

also, on the first gen, I dont believe it is 5.25, or is it, I have 6 and a 1/2 inchers in mine and they fit perfect