Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   Exterior/Interior/Audio (https://www.mazda3club.com/exterior-interior-audio-4/)
-   -   Power window Elec. Diagram (https://www.mazda3club.com/exterior-interior-audio-4/power-window-elec-diagram-39690/)

jster28 May-3rd-2005 12:24 AM

Power window Elec. Diagram
 
Does any one here have the wiring diagram for the power window setup here. It would be easier then sitting out in the driveway with the car apart figuring it out. I'm going to do the power window convertion with the factory motors and switches. Or does anyone know if i can purchase the power window wiring harness, if so Part # would be great. I'm a lazy ass, and i do so much wiring in my electrical engineering classes, i dont want to firgure it out.

Phantom Cruiser May-3rd-2005 09:40 AM

I think I have it at home in a pdf format. I can check for you...but it will be in about 8 hours!!!

macdaddyslomo May-3rd-2005 10:12 AM

I'm doing the same conversion in mine...best thing to do is get the harness....then you can get power mirrors and door locks too !! they are all on the same harness

jster28 May-3rd-2005 02:42 PM


Originally Posted by macdaddyslomo
I'm doing the same conversion in mine...best thing to do is get the harness....then you can get power mirrors and door locks too !! they are all on the same harness

do you have the part # for the harness. I just need to rig it to my aftermarket door lock already have. Do you have the panels, if not how are you going to fill in the crank holes. I can't find any panels in my color. So i'm thinking on putting flush mount tweeter to cover the holes.

jster28 May-3rd-2005 02:42 PM


Originally Posted by Phantom Cruiser
I think I have it at home in a pdf format. I can check for you...but it will be in about 8 hours!!!

That would be great thanks.

macdaddyslomo May-4th-2005 09:47 AM


Originally Posted by jster28
do you have the part # for the harness. I just need to rig it to my aftermarket door lock already have. Do you have the panels, if not how are you going to fill in the crank holes. I can't find any panels in my color. So i'm thinking on putting flush mount tweeter to cover the holes.

those will be some small ass tweeters...I am going to use hole plugs from Lowes..they just pop right in..they are black so I have to get some grey vinyl paint

jster28 May-4th-2005 11:12 AM


Originally Posted by macdaddyslomo
those will be some small ass tweeters...I am going to use hole plugs from Lowes..they just pop right in..they are black so I have to get some grey vinyl paint

I'm going to cut the holes a little bigger to get them to be flush. But I'll see what happens, i've be trying to get a hold the wiring harness. they mazda junk yard want to charge me $200, They said that its apart the dash harness.

macdaddyslomo May-4th-2005 12:22 PM

best thing to do is to find someone parting out a junker with power windows to get the harness cheap. that's what i did, although i am still waiting for it as it requires removal of the dash to remove the harness...it is seperate from the rest of the dash harness though

jster28 May-5th-2005 12:43 AM

yes, i found someone with a wrecked mp3 that is selling me it. wooohoo

Phantom Cruiser May-7th-2005 10:06 AM

See if this works --> http://ksracing.net/glass_windows_mirrors.pdf

Right-click and save-as please.

jster28 May-7th-2005 08:02 PM


Originally Posted by Phantom Cruiser
See if this works --> http://ksracing.net/glass_windows_mirrors.pdf

Right-click and save-as please.


Thanks Karen for the pdf file. It will work.

Phantom Cruiser May-10th-2005 08:24 AM


Originally Posted by jster28
Thanks Karen for the pdf file. It will work.


No problemo. I have the entire car manual on cd in multiple PDFs. I can pretty much upload whatever you guys/gals on an as-needed basis.


All times are GMT -5. The time now is 04:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands