Indiglo Gauges INSTALLED!
 

http://www.knology.net/~negatize/ima..._0261small.JPG

I decided to rather risk breaking $40 by cutting the faces to allow the needles to fit through rather than risk $300 prying open/pulling on the needles to get them out. The cut lines are visible, but its hardly noticeable. These gauges are really nice - they glow many different colors and shades at night. Comes w/ a nice switch too.

dood thats fuckin tight!!!:)

Looks good..........can you switch the colors and shit like that ???

loooks nice . how much did you get them for and from where?

You can change between 6 different colors I think. I got them from eBay: http://cgi.ebay.com/ebaymotors/ws/eB...tem=1817654832

Search for "protege indiglo" and a few just like it will come up.

i have a question, is that line through the middle of the gauge actually there, or is it a by product of scanning the picture?

It's actually there. That's where I had to cut the faces in order to fit them through the needles. I've found no way to remove the needles online w/o breaking them. It's looks funny in the picture but you can barely see them in real life. I didn't scan the pic, btw, I used a digicam.

Did anybody read where it says this guages do not require the removal of the needles for installation?

Just a quick Question Negatize, how did u install the wirings in the back? do u think u can poste up pictures of where u wired the red and black wireS?thnkx

Looks pretty sweet!!!!

I'm jealous now!!! :mad:

Yes it says that but there is no way for the entire needle to fit through the tiny holes that they provide. There are two ways around this: Remove the needles, which is impossible w/o breaking the cluster, or cutting the gauges to fit the needles through.

I'll try to get some up this weekend when I have a chance.