Bumper light flash with flasher
 

Can anyone make a REAL Howto for making the bumper light flash with the flasher, and light when it's not flashing ? I read like 4 threads with this subjet and it was VERY confusing anyone said the same thing or it was for a miata etc ..

Thanx

David

From what I heard this is what you do:


click

treat it just like a sidemarker (actually it really is) and use the dual function relay i have on my Sidemarker How-To here

Hey that's me! It is so easy to do. Just do what I did in the above thread and your done. If your still confused PM me, I'll try to explain further.

At first, I used a nc relay to have my sidemarkers flash. However, the info found at http://lighting.mbz.org/tech/how_to/markerflash/ is much easier and actually works better. Now I don't have the annoying clicking of the relays everytime I use my remote to unlock the car!

Damnit still so confusing LOL 3 ways to do it, anyone have tried one of theses ? is the bumperlight still on when the flasher is not working ?

Dave

because I don't want to make a hole in the body, it will break my 5 years waranty for the body ..

Dave

Dude, take the two wires from the bumper light, cut them with about 12" of wire left so they can be run up to the signal lights in the front of the car; splice those two wires into the signal light wires coming from the adapter for the signal lights: leaving the black wire intact (that's the ground for the circuit). Done. If the bumper lights are turned off and the signal is turned on; the bumper lights will signal 'in-sync' with the front signal lights. If the bumper lights are turned on and the signal is turned on; the bumper lights will signal 'out-of-sync' with the front signal lights.

Hope that helps:)