Own an AWR rear swaybar? Look inside, trust me, its' good.
 

Do you suffer from this:http://www.jonathan.allain.com/swaybar/CIMG1273.JPG

Notice the rust on my hex cap screws in the bracket?

Why don't you replace them with these:
http://www.jonathan.allain.com/swaybar/cimg1345.jpg
http://www.jonathan.allain.com/swaybar/cimg1347.jpg
http://www.jonathan.allain.com/swaybar/cimg1349.jpg

I just verified with AWR that the 19mm uses the same hardware. These will work for both.

I was taking pics of my 21.5mm AWR swaybar for another user on the board, and I noticed that the hex screws in my brackets for the adjustable end-links were showing a lot of rust already. I talked with Tony, and he said the only thing to do is spray WD-40 on there, or replace them with stainless steel.

I am replacing mine, so I figured anyone else would want there's replaced as well. For a nominal fee to cover shipping and handling, I will send a set of 8 stainless steel 1/4"/20 hex cap screws to anyone who wants them.

BE SURE TO TELL ME YOUR FORUM NAME!
This is a link to a paypal link:Buy Now! - $5 (shipped to US, Canada; elsewhere contact me)