Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   3rd gen Suspension/Brakes (https://www.mazda3club.com/3rd-gen-suspension-brakes-62/)
-   -   2" drop (https://www.mazda3club.com/3rd-gen-suspension-brakes-62/2-drop-42277/)

Stueck May-2nd-2006 03:40 PM

2" drop
 
on stock shocks, would that affect the life any? i know it starts to die faster, but are we talking in 10k miles?

zerocover May-2nd-2006 04:28 PM

Its depends on the spring rate not the drop.
IF the springs were specificly designed for the stock struts youll be fine for a long while.

Stueck May-3rd-2006 06:44 AM

these are the ebay green springs, no telling on the spring rate

KrayzieFox May-3rd-2006 08:39 AM


Originally Posted by Stueck
these are the ebay green springs, no telling on the spring rate

I wouldn't trust my life depending on those springs if I was you, an eBay intake I can understand but springs are a little more critical. How much are they selling for? I know we all struggle putting money together for our toys but save up for Tein S-Techs and you should be satisfied. Its a good drop, the rate won't kill your struts, they're not too bouncy plus most of the time you can buy them for $160 or so with shipping. Not a bad deal ....

Are these it ... eBay Greens ?

zerocover May-3rd-2006 11:08 AM

Tien's will kill your struts they have a 50% higher spring rate then stock.
Better handeling yes but your shocks wont survive it.

Look into a set of progress group springs or gold lines.

KrayzieFox May-3rd-2006 11:43 AM


Originally Posted by zerocover
Tien's will kill your struts they have a 50% higher spring rate then stock.
Better handeling yes but your shocks wont survive it.

Look into a set of progress group springs or gold lines.

I stand corrected ... you're right on that. Sorry for misinforming you, but I'd still advise you to stay away from the eBay ones. I guess that's just me but you can buy whatever suits your needs and budget. Good luck.

Stueck May-3rd-2006 04:52 PM

that link = yes. i am only going to have them for a short time, maybe a month or two tops. i should have all this court finished up and some moolah saved for some nice coilovers...

Stueck May-3rd-2006 04:59 PM

what are the stock spring rates on the pro?

KrayzieFox May-3rd-2006 05:52 PM


Originally Posted by Stueck
what are the stock spring rates on the pro?

Hope this helps ..
http://www.imagestation.com/picture/...9/ef28a1b6.jpg
Also, it's my knowledge that linear springs will wear your struts faster, whereas progressive will not. I may be wrong on this, but that's what I've read on other forums ... someone please correct me if I'm wrong.

EDIT: Here's the article I read:
"There are two types of springs, progressive and linear. Progressive springs are coiled tighter at the top than the bottom, so as they compress it gets harder and harder to continue to compress them. Linear springs, the coils are the same distance apart from top to bottom. A lot of people perfer the linear springs because i think the ride can be smoother..."

macdaddyslomo May-3rd-2006 07:48 PM

great info...no wonder those ground controls blowout stock struts so quick !

350 lbs/in !!!

eggynatey May-4th-2006 12:03 PM

Chiming in. :D

Progressive springs also soak up all the little imperfections in the road better than linear ones. The coils that are more tightly wound have a lower (softer) spring-rate than the rest of the spring. Nice for the road and maybe even the touge, but on the track lInear are the way to go.

Linear springs have the same rate throughout the spring. This makes the ride a little more harsh since you feel every little bump in the road, but the controllability at the edge of traction is the payoff. That's why you won't see coilovers with progressive spring rates...they're made for peformance over ride quality.

Turn-in, braking and even acceleration are all much more predictable with linear springs. :)


All times are GMT -5. The time now is 03:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands