Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   3rd Gen Protege/MazdaSpeed/P5/MP3 (https://www.mazda3club.com/3rd-gen-protege-mazdaspeed-p5-mp3-26/)
-   -   HEadlight problem. (https://www.mazda3club.com/3rd-gen-protege-mazdaspeed-p5-mp3-26/headlight-problem-43790/)

woody189 February-2nd-2007 10:04 PM

HEadlight problem.
 
I'm having a problem with my passenger side headlight. The fog lights and high beams are working fine, but the low beam stopped working. This happened a few weeks ago and I just disconnected and reconnected the wires and it fixed it for about a week. Now it stopped again. I didn't change the light because I'm not sure if that's the problem. I figured it couldn't have been burnt out because it started working again

Should I change it or is a connection thing?

any idea of the price range for the bulb if I need to change it?

Thanks.

Luzer February-2nd-2007 10:17 PM

You can try the disconnect/reconnect thing, but I would change it out. Make sure that you change the left side too. It's always good to replace both sides when one side goes bad.

If the light still doesn't work then you have a wiring problem or a bad relay.

Prices are across the board, depending on what kind you get. Shop around.

woody189 February-4th-2007 09:43 PM

re
 
alright, i guess I'll do that. thanks.

Luzer February-5th-2007 12:33 AM

Sure, no problem. Let us know how it goes.

J-Protege February-6th-2007 02:24 PM

$40 for Plasmaglow's bulbs (set of 2). They have a 10 year warranty, can't go wrong with that.

Da P-Funk! February-7th-2007 08:00 AM

Check for corrosion on the connectors and especially where the lights ground to the chassis first!

Bulbs would be the next step.

woody189 February-22nd-2007 11:47 PM

Re:
 
So I finally got to changning them, only to realize it wasn't the bulb. The socket was burnt onto the little plug thing. Not the one for the bulb, but to the power or whatever. Now I gotta get it from dealer tomorow.

Anyway, I think I might still change my bulbs to silverstars but I'm not sure how they look and if its worth it. I know it's not a substitue for HID's and everything, but anyone have any pics

Luzer February-23rd-2007 12:50 AM

Stay away from Sylvania Silverstars. The will burn out six months after you install them. I went through 2 sets of them, and both sets were toast within six months. If you search the forum, you will find others who have had the same experience. I upgraded to Osram Silverstars for my low beams, and they have been great. Been about a year and a half since I installed them, and they are still going strong. I had to order mine from europe though, cause I don't think they sell them any where in N. America.

alternatekev February-27th-2007 02:05 PM


Originally Posted by woody189
So I finally got to changning them, only to realize it wasn't the bulb. The socket was burnt onto the little plug thing. Not the one for the bulb, but to the power or whatever. Now I gotta get it from dealer tomorow.

Anyway, I think I might still change my bulbs to silverstars but I'm not sure how they look and if its worth it. I know it's not a substitue for HID's and everything, but anyone have any pics

I'm having this exact same problem... did all of the plugs along one side of the whole assembly fuse together? That's what happened with mine and I need to get the plastic part that connects to the engine's electrical system replaced, but I'm having a hell of a time finding one.

Please let me know how this works out for you, as I'll just take it to the dealer if I have to. I called them and asked if I could just buy that part, but they said Mazda only sells the entire wiring harness... for around $600.

Da P-Funk! February-28th-2007 11:07 AM

Junkyard! Cut and splice (solder and shrink wrap! ;) )

KrayzieFox February-28th-2007 11:40 AM


Originally Posted by J-Protege
$40 for Plasmaglow's bulbs (set of 2). They have a 10 year warranty, can't go wrong with that.

Where do you buy these? I wanna get some bulbs with a good warranty .. sick of replacing them every 6 months!!

Olestra February-28th-2007 01:31 PM

If you want good bulbs, get Philips bulbs.

http://www.xenonexpert.com/xtechalogenbulbs.html

Lifetime warranty, so they say.

Da P-Funk! March-1st-2007 07:28 AM


Originally Posted by KrayzieFox
Where do you buy these? I wanna get some bulbs with a good warranty .. sick of replacing them every 6 months!!

^werd.
I am scheduled for another silverstar dual failure in 3 months. sigh.

woody189 March-16th-2007 12:37 AM

socket
 

Originally Posted by alternatekev
I'm having this exact same problem... did all of the plugs along one side of the whole assembly fuse together? That's what happened with mine and I need to get the plastic part that connects to the engine's electrical system replaced, but I'm having a hell of a time finding one.

Please let me know how this works out for you, as I'll just take it to the dealer if I have to. I called them and asked if I could just buy that part, but they said Mazda only sells the entire wiring harness... for around $600.

I'm guessing you ordered it or replaced it by now, but I didn't realize your question till now. Idk if you found it at a junkyard, but I got mine from dealer. it was 15 bucks and i just asked for the socket for the headlight.

And it wasn't all the plugs. It was jsut the the bulb into the socket. i had to pry it out.

J-Protege March-16th-2007 01:36 PM


Originally Posted by KrayzieFox
Where do you buy these? I wanna get some bulbs with a good warranty .. sick of replacing them every 6 months!!

I found them at a performance shop locally, but you can order them from the plasmaglow website as well. HID Blue looks nice - bright white, with just a hint of blue.

Not like those cheap ebay bulbs that are just painted blue.

As for the original problem, if the whole assembly is gone, replace it with an HID setup. Prolly get it for under $600, looks alot better, and should last forever.


All times are GMT -5. The time now is 02:42 PM.


© 2024 MH Sub I, LLC dba Internet Brands