Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   3rd Gen Protege/MazdaSpeed/P5/MP3 (https://www.mazda3club.com/3rd-gen-protege-mazdaspeed-p5-mp3-26/)
-   -   a couple quick questions...engine noise and stereo (https://www.mazda3club.com/3rd-gen-protege-mazdaspeed-p5-mp3-26/couple-quick-questions-engine-noise-stereo-44177/)

londonb5 April-17th-2007 04:03 PM

a couple quick questions...engine noise and stereo
 
My first question concerns the stock stereo in the 2001 Proteges. I am in between aftermarket stereos and tried to put the stock stereo back in as a temporary fix. I can't get it to come on, however. I was wondering if anyone knew if there was an internal fuse that was possibly blown, and if so where it was located.

Second, my 2001 LX 2.0 Protege has 92,000 miles on it. I've had regular oil changes done, but recently it seems to be running loudly. They asked me to turn off the engine the last time I tried to go to the McDonald's drive-thru. Does anyone have any thoughts or suggestions?

Thanks a lot!
Brian

KrayzieFox April-17th-2007 04:32 PM

I have no idea on the radio issues, but what do you mean by "the engine is running loudly?" What kind of loud? Clickity click loud or just humming loud? Are your fans running when this happens?

londonb5 April-17th-2007 04:50 PM

Just humming loud, i guess. no clicking that i know of. and i believe the fans are normally running at this time.

rsx type s April-17th-2007 06:48 PM

ck front pipe , possible flange is gone & front pipe is seperated from center pipe ,,,loud on accel? And yes their is a fuse inside radio soldered in board 10 amp I think

londonb5 April-20th-2007 03:09 PM

rsx - i'm not sure what you mean by "front pipe."

KrayzieFox - what would your advice be if i have a clicking?

Thanks

KrayzieFox April-20th-2007 03:13 PM


Originally Posted by londonb5
rsx - i'm not sure what you mean by "front pipe."

KrayzieFox - what would your advice be if i have a clicking?

Thanks

I think he means the pipe that attaches to the bottom of the header/exhaust manifold. Make sure all your exhaust pipes are a tight fit, as that would certainly make your car way loud if they weren't.

If you have clicking, I honestly couldn't tell ya what to do. I was just trying to get you to describe the noise a little better, and was praying you wouldn't say clicking. It's usually not a good sign so as long as it doesn't click we won't even get into it.

rsx type s April-21st-2007 08:05 AM

Yes I mean the cast iron pipe directly bolted to your exhaust manifold, their are 2 ears that stick out from the pipe , to bolt too the center (resonator ) pipe , they have the 2 bolts ,springs & a donut gasket so the pipe can move with the engine flex , anyways the ears rust & break off leaving the front pipe free to open up from the center pipe (most noticeable when you give it a shot in reverse ) due to engine flexing.Or it's possible that the manifold is cracked ,,,,In all cases you should be able to detremine if it is an exhaust leak or not . Hell it may just be that your rad & a/c fan are running and that's it .


All times are GMT -5. The time now is 07:06 PM.


© 2024 MH Sub I, LLC dba Internet Brands