Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   3rd Gen Protege/MazdaSpeed/P5/MP3 (https://www.mazda3club.com/3rd-gen-protege-mazdaspeed-p5-mp3-26/)
-   -   Brembo Drilled and Slotted (https://www.mazda3club.com/3rd-gen-protege-mazdaspeed-p5-mp3-26/brembo-drilled-slotted-39322/)

hughes412 April-4th-2005 06:38 PM

Brembo Drilled and Slotted
 
2 Attachment(s)
Just in case you guys wanted to know where to get some there is a place in Dallas that has them, cheap too! Full set for 195.00. I just got mine in and the look great. This is the guy that said I could have them for free if I told people where I got them. well now I'm holding up my end. :bt:

Sport Brakes
2521 Merrell Rd
Dallas Tx 75229-4648

972-620-9311

mthegodfather April-4th-2005 06:40 PM

Those look nice. Which brake pads are you gonna run with them?

amrit April-4th-2005 07:32 PM

what if i have a 4wd, i'd have to replace all 4 rotors right?
and what about size and stuff? I don't know much about these things that's why I'm askin'

hughes412 April-4th-2005 07:42 PM

I don't know, I'll use the factory ones for a while. I'll have to look into them. Befor I put them on I am going to debur them. Some of the edges are alittle sharp.

mthegodfather April-4th-2005 07:43 PM

It would be best to change all of them but you could get away with just doing the front.

hughes412 April-4th-2005 07:43 PM


Originally Posted by amrit
what if i have a 4wd, i'd have to replace all 4 rotors right?
and what about size and stuff? I don't know much about these things that's why I'm askin'


I say call them, a set of 4 (front and back) for an MSP or P5 run 195.00. I wouldn't think yours would be more.

OH I just got it, I thought you ment 4 wheel drive~~ 4wdisk. You could do just front, but for the price I would do all four.

amrit April-4th-2005 10:55 PM

no it's a 4 wheel drive i have
i have brakes in the front and the back as well.
so i should just change all 4 rotors.

hughes412 April-5th-2005 07:36 AM


Originally Posted by amrit
no it's a 4 wheel drive i have
i have brakes in the front and the back as well.
so i should just change all 4 rotors.


Yes, you wouldn't want to through of the balance of the brakes.

And kickass on the 4x4! I bet that can be fun.

amrit April-7th-2005 12:02 AM


Originally Posted by hughes412
Yes, you wouldn't want to through of the balance of the brakes.

And kickass on the 4x4! I bet that can be fun.

ok thanks

and i love the 4x4, it's very stable on the road! :D

hughes412 April-10th-2005 12:37 AM

4 Attachment(s)
Just thought I would show off the rotors. It's not that I think there all that, it's because Free rotors are all that :tit: I love free stuff. Now I know how PHANTOM feels. :bt:

kcidmil April-10th-2005 03:34 AM

Anyone come up and say you installed them backwards? I had that happen to me when I installed my Brembo slots on my Maxima. That's why I keep that sheet in my car...

edit: I might get me a set for my P5 if I keep it.

mitchman April-10th-2005 09:02 AM

hughes412: Nice! Do you have lowering springs?

I'm trying to figure out what rims/size I'm going to get for my '03, but I can't change the springs to lower it.

Your car looks great!

hughes412 April-10th-2005 10:50 AM


Originally Posted by kcidmil
Anyone come up and say you installed them backwards? I had that happen to me when I installed my Brembo slots on my Maxima. That's why I keep that sheet in my car...

edit: I might get me a set for my P5 if I keep it.


You know I thought of that (which one goes where) but I looked on the box and they're marked L/R. I looked at the box and put them on occordingly. The right side is still the passanger side right?!!

hughes412 April-10th-2005 10:54 AM


Originally Posted by mitchman
hughes412: Nice! Do you have lowering springs?

I'm trying to figure out what rims/size I'm going to get for my '03, but I can't change the springs to lower it.

Your car looks great!

Yes I have the Eibach 1.8 drop springs. With the sterio system it's about a 2 in drop in the back. And man does it handle great. The wheels are 17s, I think 7 1/2 wide, I can't remimber. But if you Auto crossing I would go with a light weight 15in wheel.

Oh and I forgot to say that the wheel hop is really bad with the 17s. I almost never had that with the 15. Now I can't launch with out it. That sucks.

Stueck April-10th-2005 11:26 AM

doesnt matty sell rotors too?

nice pics by the way


All times are GMT -5. The time now is 08:03 AM.


© 2024 MH Sub I, LLC dba Internet Brands