Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   3rd Gen Protege/MazdaSpeed/P5/MP3 (https://www.mazda3club.com/3rd-gen-protege-mazdaspeed-p5-mp3-26/)
-   -   '02 Protege5 Fog lamps (https://www.mazda3club.com/3rd-gen-protege-mazdaspeed-p5-mp3-26/02-protege5-fog-lamps-35580/)

imcndn July-13th-2004 09:51 AM

'02 Protege5 Fog lamps
 
I have a cracked fog lamp casing that I would like to replace. Can someone suggest a manufacturer or two for aftermarket fog lamp assemblies? The factory replacements are too expensive. Much appreciated.

Also if you could specify a size or part number it would be very helpfull!

Thanks again!
imcndn

centsless July-13th-2004 11:10 AM

Just wanted to let you know that i'm planning to remove my stock fog lights and replace them with the Hella Angel Eyes 2500 series lamps. they have dual stage lighting, 1st stage is a LED ring in the edge of the lamp, that more or less lights up like the BMW headlamps and the second stage is when the H3 bulb lights up. somthing to think about, its around the $50-70 range shipped. I ha bought my upgraded hella lamps a while back from this Hella dealer in PA, susquehanna motorsports, he has the 2500 series also, check it out.

http://www.rallylights.com/Optilux/optilux_2500.asp

here is a picture of the lights at night http://www.grandamgt.com/mod_images/...eleye5-lrg.jpg

hope that gives you some ideas.

-Denham

ZOOM_X_TWO July-14th-2004 02:47 AM

Will those Hella's fit the OEM bumper on a p5? If so, I may be interested. ALso, are they brighter than the OEM's?

The fogs in the pic look great!

Thanks, Brad.

centsless July-15th-2004 02:26 AM

not sure if the size would fit, , but i know that the optilux fog lights them selfs are 4" in diameter and 3.1" in depth. I'm off from work on friday, so i'll be doing some measuring then, i will get started on this project about end of this month, (too much crap going right now).
on to the brightness of the bulbs, its uses the standard h3 bulbs, i know the facotry lamps come with 55 watts power, oems were i think 27th watts when i removed them. i may upgrade to the optilux, or just get 70 watt bulb in there. anything over that gets the lamp too hot and may cause other problems..

take care,
Denham

ZOOM_X_TWO July-15th-2004 11:07 PM

I see...thanks for the info! Good luck on the project, please keep the thread updated.

Thanks again, Brad.

Redfyre July-18th-2004 05:51 PM

I have a set of Pilot fogs installed in my P5. They are the same size as the OEM fogs but needed a little modding to install. They are super bright and the light is pure white.

ZOOM_X_TWO July-19th-2004 12:18 AM


Originally Posted by Redfyre
I have a set of Pilot fogs installed in my P5. They are the same size as the OEM fogs but needed a little modding to install. They are super bright and the light is pure white.

I am very interested...where did you buy these, and how much did they cost you? Also, what kind of modding would I need to do? Can I use my existing harness and all?

Can I see a picture of them?

Thanks, Brad.

macdaddyslomo July-19th-2004 08:58 AM

What series Pilots ???


All times are GMT -5. The time now is 11:02 AM.


© 2024 MH Sub I, LLC dba Internet Brands