Shifter install - broken snap ring???!!!!
I was installing my Kartboy stuff today (bushings and shifter). No problems with the bushings but when installing the shifter was a NEGATIVE GHOST RIDER. I was pulling the snap ring together using the two prongs inserted into the two holes when one of the holes broke giving me nothing to pry the ring together. Am I SOL or is there another way?
Has anybody done this before??? |
You can try using a flathead screwdriver or even just put the side with the broken pin hole in first and work the other side in. I just put my B&M in, and found it pretty easy provided you have a pair of snap ring pliers. Good luck.
|
although it would probably work....I would suggest getting another snap ring. its the RIGHT thing to do. and NO you don't have to go to a dealer for one....take the broken one with you so you can compare to the new and go to some good autoparts houses...if you have one that has a machine shop...that would be your best bet.
|
All times are GMT -5. The time now is 11:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands