Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   3rd gen Engine/Drivetrain (https://www.mazda3club.com/3rd-gen-engine-drivetrain-57/)
-   -   Need some stock info (https://www.mazda3club.com/3rd-gen-engine-drivetrain-57/need-some-stock-info-10647/)

Ambient August-12th-2002 05:30 PM

Need some stock info
 
I need this info from a 1.8/2.0 Protege, or if it should be the same as other cars, that info...

This can come from a stock car. (Yes stock also means those with just an intake/ehxaust ir other minor bolt ons)

I need the ambinet oil temp, ambient oil pressure and ambient exhaust gas temp.

chdesign August-12th-2002 06:54 PM

Once heated up and at running speeds at an average of 2500 rpm oil PSI is right at 49 psi. At first start it runs up to 80 psi. I know that much. Oil temp should be the same as your water temperature thermostat.

Traveler August-12th-2002 10:20 PM

Actually oil temp will run slightly higher than water temp since it doesn't have a radiator and the oil is in contact with hot parts that never come in contact with the water jacket. Usually if your coolant is running 200 deg, your oil will run 215 or so fully warmed up.

Ambient August-13th-2002 11:00 AM

Thanks guys

TTT

Any of the others?


All times are GMT -5. The time now is 08:58 AM.


© 2024 MH Sub I, LLC dba Internet Brands