Need Part # Help!
Ok, so stupid me changed out my stock shifter for the Kartboy one. Not thinking, I put everything back together. Everything, but the 2 little bushings where the shift rod bolts to the shifter iteslf. They fit inside the end of the shift lever where it bolts up to the shift rod. I checked with my local (know nothin) parts dept. and he said I have to purchase the whole shifter/shift rod/shifter mounting assembly to get those parts. I am not about to do that as that does not make much sense to me. Before I head of to the local junkyard to see if I can find some, does anyone know or can get the part # for me. I would greatly appreciate it.
And if you can get that part #, how about a # for the teflon bushings in the shifter mount. The ones under the Snap Ring, there are 2. Thnaks in advance. |
Originally posted by PseudoRealityX doesnt Kartboy sell the bushings seperately? The way I see it, you have 3 options: 1) track down the part numbers and buy from dealer 2) find someone who installed a B&M shifter who doesn't need their bushings anymore and buy theirs. 3) Return the Kartboy shifter and get a B&M shifter yourself. |
I just ordered new ones from Corksport, they sold me half the kit (the part that I need hopefully) for $15. I should have them this week. Thanks PseudoRealityX.
|
Originally posted by Hawkeye no, the bushings they sell are different than the ones rider needs. The way I see it, you have 3 options: 1) track down the part numbers and buy from dealer 2) find someone who installed a B&M shifter who doesn't need their bushings anymore and buy theirs. 3) Return the Kartboy shifter and get a B&M shifter yourself. but i DO have a question....what happened to them? where is your stock shifter? did you just throw it all in the trash after you yanked it out? |
Nuke i don't think you have to reuse those teflon bushings with the B&M. The brass bushing that came with it replaced those two white teflon bushings from stock.
I am an idiot who misreads posts.:D |
oh duh, I was thinking of the wrong bushings. See what happens when you don't read the post carefully! :o
|
Originally posted by Sir Nuke but i DO have a question....what happened to them? where is your stock shifter? did you just throw it all in the trash after you yanked it out? Jeff M. |
Originally posted by Sir Nuke but i DO have a question....what happened to them? where is your stock shifter? did you just throw it all in the trash after you yanked it out? |
Originally posted by arl240 Nuke i don't think you have to reuse those teflon bushings with the B&M. The brass bushing that came with it replaced those two white teflon bushings from stock. I am an idiot who misreads posts.:D |
Rider, do you have a link to where you got those bushings from?
|
That's why I am an idiot who misreads posts. I thought (wrongly, b/c of the aforementioned idiocy) that he was talking about the two white rings that went around the ball, not the little green/brown bushings on the linkage. My bad.
|
http://www.corksport.com/
You have to click on the Protege/Familia Link, then 90-94 Interior. The part Number is prt-9-003. It is actually a 4 piece set, the 2 bushings where the shift linkage meets the shifter and where the linkage meest the trans. So, if you don't already have the Kartboy bushings, go ahead and order the whole set. Otherwise, they split the order and charged half for the set I needed. |
All times are GMT -5. The time now is 02:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands