question
 

I but a ingen intake on my 1.6 last week. I have not had any problems but I have heard others say they have( after i but the dame thing on)mad: . What problems are people having and is every one having problems or just some.

Carl

The main problem I think people where having with the Injen intake is that they where trying to fit a 1.6L intake on a 1.8L or 2.0L which doesnt work. Thats why Injen doesnt sell an intake for the 1.8L or 2.0L engines (well, until the 2.0L ships next week). So thats been one problem (and the major one!) The other problem in my opinion is improper installation. The MAF has to go on there tight & perfect or it wont read correctly which can cause problems. Also, one of the reasons to switch to a CAI is get more air. More air means more dirt. So another problem people have is a dirty MAF. You should go in and carefully clean your MAF with q-tips & alcohol. You'll find it to be very dirty. Those are my views on the intake. I know people that have had the intake with no problems. And the people that have stated problems all got rid of it before they could figure anything out & now they just badmouth it.

Actually, several people reported problems on the 1.6L engine. Not too many people bought the intake for the 1.8L or 2.0L engines because you had to cut it up to get it to fit. What's the point of that when other intakes were available, or coming soon?However, someone ( I forget who) contacted Injen about the problems and they were perfectly happy to work with everyone to resolve them. When the person that contacted Injen asked for people's information to send to Injen, only a couple of people responded. This leads me to believe that some of the people reporting problems either resolved them, or weren't confident that they didn't cause them in the first place. :confused:

Hey guys I need a little help. I am starting to get some small jerks when riding in he lower rpm. I have a 1.6 and I installed the ingen intake last week end. This has been going on for 2 days now. It not like is stalling or any thing it feels a little like I'm taping the gas. I am going to clean the MAF tomarrow any one have any other tips. Thanks for the help.



Carl

99 LX

cc2 I had the exact same problem with my injen intake i have check every single thing on that intkae and could not find out waht it was. There is one thing i did notice though the filter looks kinda weak. my opion is try ordering kn filter part # ra-0610 that should help i think. ask mike lucero he solved the problem with the injen intake with different filter. i ended up selling mine and now i miss the throttle responce and the fucking awesome sound it made. if you need any help e-mail me bigben18@bellsouth.net.

goodluck
Ben Dean

http://protege000.tripod.com