Ordered a BPT w/ ECU and Trans
 

Well

after months of trying to find a decent donor MX-6 / Probe I have given up and decided to pick up a BPT motor.

The motor comes with Intake / Exhaust ECU and trans.

I have a 90 GT, is there any use for the Trans in my application?

I heard the GTX trans was a weak point, is the stock GT trans the way to go?

Rick

90 CND GT

Re: Ordered a BPT w/ ECU and Trans
 

The trans is going to be for a 4wd car(if it was pulled out of the car with the bpt...), so the GT trans is the way to go.

Re: Re: Ordered a BPT w/ ECU and Trans
 

Thanks, I read somewhere that the GTX comes stock w/ LSD, is it even possible to use it in my trans?

Rick
90 GT

Re: Re: Re: Ordered a BPT w/ ECU and Trans
 

I can't answer your question there. Some playing around would tell you...

May I ask how much you paid for everything?

I picked up the Motor for $1800CDN, the Intercooler from a Probe GT for $200CDN and an 93RX7 Turbo Fuel pump for $225CDN
Hopefully it all comes together smoothly!

Hey, let me know how it all comes together. I have one on order and I'm not sure how easily the swap will go.

the tranny cant be used im alomost positive .. sorry whats 1800 in us dollars? the gt tranny will be stroung enough but the axles are weak depends how much power ur gonna throw into it im looking for around 300hp not sure if the gtx turbo can handle that ...Jon 93 lx

\:eek: :eek: :eek:

do you want to see if your Pro can fly ????:D

i have a gtr motor so its gonna hit 300 hp with a haltech im hoping to run a 12.5 to 13 with bradens help ...we will see :-)

With a proper intercooler, exhaust,filter and a ported head, you should make 300 hp at 1.5-1.6 bar with a GT-R engine on stock internals. If you change your oil at a regular basis,don`t drive it at high rpm`s before the temp is high enough and don`t stop it before the engine has cooled down, you have a really reliable setup ...If the engine comes from a GTX, it gets a little more complicated. The turbo is a lot smaller, and the engine internals are weaker. Personally, i wouldn`t even think of trying to get 300 hp out af a near-stock GTX-engine.

I don't believe the GTX block is too much weaker than the GT-R. It's missing the web casting and the squeeze cast pistons but with all that stuff missing I still managed to pull 325bhp and 335lb-ft of torque out of a GTX block with a GT-R turbo and GTX head.

The head is where the power is, both turbo's respond very well to a good port & polish.

I wish i had the money for a P&P maybe some day ...Jon

Where do you live in canada. I'm near montreal in Quebec and i just bought my gtx today Nearly the same price has you. I have the transmission to. I'm going to know next week probably if the lsd fits in a gt transmission. I work in a transmission shop and one of the rebuilder his going to check it with me. I may have the ecu for 200$.

I live in Victoria BC,
I had my GTX transmission taken apart to see if there were any usable bits from that transmission.
The viscous LSD is in the "central" housing prior to the propeller shaft so there is no way to use any part of it in our application unless you are possibly upgrading a 4wd Pro.
I ended up just rebuilding my existing transmission. There were very few bits if any that were transferrable from the GTX trans.
I finally have almost all the pieces to put it all together possibly in the next week or two. It's taken much longer than I originally expected (Waiting for Mazda Parts).
If you are going the way of the GTX ECU, dont forget you need the Knock Control Unit off the firewall.
You might also look at swapping the Head off your GT to the GTX. The GTX has a "restriction" on the intake side of the head for some reason.
I am going to be doing up my N/A for a later upgrade with a Quaffe LSD possibly!

Rick
Coming Soon :
90 GT(x)
2.5 Stainless Exhaust
Dynomax SS Ultra Flo Muffler
Dynomax Super Cat
RX-7 Turbo MAF & Fuel pump
K&N Cone Filter
Custom Polished Stainless Downpipe
ZX-2 Struts w/ Eibach Springs
Front Mounted Intercooler
Bosh Blow off Valve