Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   1st gen/323/GLC Engine and Drivetrain (https://www.mazda3club.com/1st-gen-323-glc-engine-drivetrain-59/)
-   -   auto tranny prob (https://www.mazda3club.com/1st-gen-323-glc-engine-drivetrain-59/auto-tranny-prob-38303/)

Abzzz January-26th-2005 08:03 PM

auto tranny prob
 
recently... i have no drive in any of the drive gears.. or reverse.. it happens when i just start the car in very cold weather..... id b reving in D, n the hold light starts blinking....after a while when the car is completely warmed up.. everything is fine and no hold light either... so wats up? fluid level? time to change the fluid/filter?

also.. there is some tranny noise coming to.. like a faint noise... is there ne noise associated too when the tranny is low on fluid?

tonkabui January-26th-2005 08:53 PM

definitely check your fluid. it sounds like it's broken down.

Abzzz January-26th-2005 09:12 PM

checked the fluid.. its light brown with no burnin smell.. the level.. i cant really distinguish it... im assuming its time to change fluid/filter... havent done it since more than 30k

tonkabui January-26th-2005 09:15 PM

tranny fluid should be have a hint of red. if yours is coming out brown, it's definitely time to change it out. change the filter while you're at it. my recommendation is just to do a simple tranny refill (empty out the tranny fluid pan, then refill the approximately 3 quarts that come out) once a year and change the filter every two years.

Abzzz January-27th-2005 02:21 PM

alrite the fluid is gone.. burnt.... cud tht b why its makin tht whining noise? n some hoses r wet... leakin prolly..... is it worth tryin to change the filter n fluid? or should i conclude tht the tranny is gone?

ghettopro January-27th-2005 03:49 PM

I would say its gone because if you hear noises out of it and its not going anywhere its basically dead, which in my case was a CV shaft...may be your problem so i just rememberd that so forget about my saying dead tranny and check CV shafts...that was my prob..

Abzzz January-28th-2005 01:47 PM

ok changed the fluid completely... shifts better.. no noise... lets c how this one goes.. thanx for the ideas guys..

ghettopro January-30th-2005 10:38 AM

Glad to hear things came out better, glad what i thought was wrong wasnt wrong, hope it works .


All times are GMT -5. The time now is 06:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands