GROUP BUY :: Mazda3 Forged Rods
February-28th-2006, 06:56 PM
#1
Banned
Thread Starter
Join Date: Feb 2004
Location: Grayslake, IL
Posts: 275
GROUP BUY :: Mazda3 Forged Rods
Retail Price: $400
Forums GB Price: $329 plus shipping
These are H-Beam Forged connecting rods for the 2.3 liter engine. Looking to run a HiBoost turbo kit or make big numbers without breaking your engine? These rods are the way to go. In-stock and ready to ship.
http://mazda3online.web.aplus.net/pr...roducts_id=383
All Eagle "ESP" Connecting Rods are manufactured from a TWO-PIECE FORGING. The forging process forces the grain into the shape of a connecting rod, resulting in a superior fatigue life. The rod cap is forged separately so that the grain runs perpendicular to the load forces, which strengthens the connecting rod. Many aftermarket connecting rods are manufactured from 4340 steel. 4340 specs allow a range of different materials to achieve the desired results. Although it is a more expensive process, all Eagle "ESP" 3-D connecting rods also include higher content of nickel & chrome, which increases the strength & fatigue life without making the connecting rod brittle.
Extensive testing has proven Eagle's two-piece forging superior to any one-piece forging on the market! All Eagle "ESP" Rods are clearly identified. Proper rod bolt torque is vital to connecting rod life. A rod bolt fastner is without question the highest stressed fastener in the engine. The big end bore of the connecting rod is a stressed bore in much the same way as cylinders are on a block. It is equally important to torque properly to provide proper strength & to insure the big end of the rod sizing is correct. Improper torque will result in premature rod failure!
Forums GB Price: $329 plus shipping
These are H-Beam Forged connecting rods for the 2.3 liter engine. Looking to run a HiBoost turbo kit or make big numbers without breaking your engine? These rods are the way to go. In-stock and ready to ship.
http://mazda3online.web.aplus.net/pr...roducts_id=383
All Eagle "ESP" Connecting Rods are manufactured from a TWO-PIECE FORGING. The forging process forces the grain into the shape of a connecting rod, resulting in a superior fatigue life. The rod cap is forged separately so that the grain runs perpendicular to the load forces, which strengthens the connecting rod. Many aftermarket connecting rods are manufactured from 4340 steel. 4340 specs allow a range of different materials to achieve the desired results. Although it is a more expensive process, all Eagle "ESP" 3-D connecting rods also include higher content of nickel & chrome, which increases the strength & fatigue life without making the connecting rod brittle.
Extensive testing has proven Eagle's two-piece forging superior to any one-piece forging on the market! All Eagle "ESP" Rods are clearly identified. Proper rod bolt torque is vital to connecting rod life. A rod bolt fastner is without question the highest stressed fastener in the engine. The big end bore of the connecting rod is a stressed bore in much the same way as cylinders are on a block. It is equally important to torque properly to provide proper strength & to insure the big end of the rod sizing is correct. Improper torque will result in premature rod failure!
Thread
Thread Starter
Forum
Replies
Last Post
mazda3po
Mazda3/Mazdaspeed3
0
July-18th-2014 03:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)