Mazda3Club.com  

Go Back   Mazda3Club.com > General Discussion > 3rd Gen Protege/MazdaSpeed/P5/MP3
Sign in using an external account
Register Forgot Password?
Register Photos FAQ Members Calendar Search Today's Posts Mark Forums Read Used CarsVendors TSB & Recalls
Welcome to Mazda3Club.com

3rd Gen Protege/MazdaSpeed/P5/MP3 General/Maintenance Discussion for 1999-2003.5 Models Only (BJ Chassis)

Reply
 
 
 
 
Thread Tools Search this Thread Display Modes
Old December-4th-2002, 09:45 PM   #1
RA2OR
Protege Enthusiast
 
Join Date: Nov 2002
Location: Northern Ontario, Canada
Posts: 75
RA2OR is on a distinguished road
Windshield squirters freezing up!!

Does anyone else have a problem with the front windshield squirters freezing up in cold weather. The back one seems to work fine (on a P5). So far the only times I have needed them were on the highway and it was about -20 to -30 degrees out. The blue fluid in there is supposed to be good to -40. Either that or the hose is disconnected which I can't see because it's burried in the wheelwell. Has anyone else had this problem?
__________________
2002 Protege 5
1999 CBR600F4

RA2OR
RA2OR is offline   Reply With Quote
Old December-4th-2002, 10:06 PM   #2
JJB
Protege Owner
 
Join Date: Oct 2001
Posts: 731
JJB is on a distinguished road
I have not been in as cold a weather as you have, but on my old car (the junker that keeps my parking spot warm) the nozzles for the spray were on the stalks of the wipers. The washer fluid would freeze in the delivery tubes. I really do not think that the generic blue stuff makes it to the really low temps. I solved the problem by going to Rain-X winter stuff, the advertise -35degF right on the bottle and once I switched over I never had frozen fluid again.

On my current car that is what I use as well.
JJB is offline   Reply With Quote
Old December-5th-2002, 12:43 AM   #3
Pro_fan
Bruce Leroy
 
Pro_fan's Avatar
 
Join Date: Dec 2001
Location: Calgary, AB, Canada
Posts: 788
Pro_fan is on a distinguished road
Never had that problem and I had my Pro last winter as well and I know we hit a few really cold days. Check to see that the nozzles aren't plugged up.
__________________
Mike

2003 ES-GT 2.0L - 5 speed
Black Mica
Monsterflow Short-ram Intake
Pro_fan is offline   Reply With Quote
Old December-5th-2002, 12:48 AM   #4
nate0123
Protegéphile
 
nate0123's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 1,037
nate0123 is on a distinguished road
Send a message via AIM to nate0123
Hmm, mine haven't frozen up... but there's still these annoying little gobs of carnauba wax in there and one of the jets sprays sort of down and to the side.
__________________
nate0123 is offline   Reply With Quote
Old December-5th-2002, 12:56 AM   #5
Installshield
Use this to install stuff
 
Join Date: Mar 2002
Location: State College, PA
Posts: 1,069
Installshield is on a distinguished road
Send a message via AIM to Installshield
Yeah I use some kind of Rain X stuff in my P5. They claim it has some de icing agents in it as well, which makes it good for defrosting the windshield in the morning quickly. I have used it in temperatures as low as 5 to 10*F. Never had a problem with the nozzles freezing. Just looks like *** where it dries on the side of the windshield
__________________
"I'm a Union Delegate." Henry Hill '63
Installshield is offline   Reply With Quote
Old December-5th-2002, 03:27 AM   #6
proman
Registered User
 
Join Date: Apr 2002
Location: Buffalo NY
Posts: 336
proman is on a distinguished road
Send a message via AIM to proman
i also use the rain-x stuff. works great and haven't frozen up on me since i switched to it either
__________________
'02 Silver ES
proman is offline   Reply With Quote
Old December-5th-2002, 07:50 AM   #7
bmorton
Protege Enthusiast
 
Join Date: Feb 2002
Location: London, Ontario
Posts: 112
bmorton is on a distinguished road
It was -20 (-4 F) here the other morning and my passenger-side washer nozzles were mostly frozen, with only a little fluid leaking out (driver's-side worked fine). My previous car (VW) had heated washer nozzles to avoid this. Changing fluid won't help if the nozzles themselves freeze up, so best to check them before leaving home if it seems to happen often.
bmorton is offline   Reply With Quote
Old December-5th-2002, 09:27 AM   #8
Alex M
Registered User
 
Join Date: Sep 2002
Location: Ottawa, Canada
Posts: 11
Alex M is on a distinguished road
Send a message via ICQ to Alex M
Re: Windshield squirters freezing up!!

Quote:
Originally posted by RA2OR
Does anyone else have a problem with the front windshield squirters freezing up in cold weather. The back one seems to work fine (on a P5). So far the only times I have needed them were on the highway and it was about -20 to -30 degrees out. The blue fluid in there is supposed to be good to -40. Either that or the hose is disconnected which I can't see because it's burried in the wheelwell. Has anyone else had this problem?
Mine have frozen temporarily but it seems to be more with ice covering the nozels rather than the fluid freezing up. They seem to work about 5 minutes later. Shrug.
__________________
Alex
Alex M is offline   Reply With Quote
Old December-5th-2002, 09:38 AM   #9
Pro_fan
Bruce Leroy
 
Pro_fan's Avatar
 
Join Date: Dec 2001
Location: Calgary, AB, Canada
Posts: 788
Pro_fan is on a distinguished road
Does the Rain-X stuff hamper the use of the wipers? I've heard of normally applied Rain-X causing wipers to chatter across the windshield.

Reason I ask is because there is a lot of crap that gets tossed up onto your windshield in the winter and normal Rain-X wouldn't do any good for it.

I'm interested in the de-icing factor of that Rain-X wiper fluid though!
__________________
Mike

2003 ES-GT 2.0L - 5 speed
Black Mica
Monsterflow Short-ram Intake
Pro_fan is offline   Reply With Quote
Old December-5th-2002, 09:51 AM   #10
thrasher
Protege Newbie
 
Join Date: Dec 2002
Location: Markham, Ontario
Posts: 17
thrasher is on a distinguished road
Quote:
Originally posted by nate0123
Hmm, mine haven't frozen up... but there's still these annoying little gobs of carnauba wax in there and one of the jets sprays sort of down and to the side.
You can stick a pin or long long thin object into the nozzle and readjust it. I had to readjust both my driver side nozzles after I left the dealer as they shot up and over the car and onto my trunk.

I'll second (or third) the Rain-X washer fluid as after a bunch of squirts it acts as if you did a normal Rain-X application and water beads off nicely. With a normal Rain-X application what could happen is the chemical builds up on your wiper blades like wax causing them to chatter across your windshield as mentioned earlier in the thread.
__________________
'03 Protege ES
'86 RX-7 GXL
thrasher is offline   Reply With Quote
Old December-5th-2002, 10:37 PM   #11
Installshield
Use this to install stuff
 
Join Date: Mar 2002
Location: State College, PA
Posts: 1,069
Installshield is on a distinguished road
Send a message via AIM to Installshield
Quote:
Originally posted by Pro_fan
Does the Rain-X stuff hamper the use of the wipers? I've heard of normally applied Rain-X causing wipers to chatter across the windshield.

Reason I ask is because there is a lot of crap that gets tossed up onto your windshield in the winter and normal Rain-X wouldn't do any good for it.

I'm interested in the de-icing factor of that Rain-X wiper fluid though!
I never had any chattering problems. Works just like the blue stuff. I am currently using Bosch Micro Edge Excel blades or whatever they are called and they are great as well. But I never had chattering with the stock blades.
__________________
"I'm a Union Delegate." Henry Hill '63
Installshield is offline   Reply With Quote
Old December-6th-2002, 11:35 AM   #12
Tom Slick
Registered User
 
Join Date: Feb 2002
Location: central coast calif.
Posts: 260
Tom Slick is on a distinguished road
Send a message via ICQ to Tom Slick
i've used rain-x window treatment for years, i never get any chattering or build up, and it works really well. i just started using the castrol accu vision and it works well also. it is not quite as good as the rain-x but it is much easier to apply. you just spray it on like window cleaner and wipe it off.
rain-x washer fluid works well also.
__________________
My other "car" has 16,000hp, 6400lb-ft of torque at 13,000 RPM.
Tom Slick is offline   Reply With Quote
Old December-7th-2002, 02:19 AM   #13
jlanger
Protege Enthusiast
 
Join Date: Dec 2001
Location: Roseville/St Paul, MN
Posts: 300
jlanger is on a distinguished road
I usually use the cheap blue stuff. Though every now and then I'll get a bad bottle that'll freeze up on me. I usually keep a bottle bottle in the trunk and if it freezes up I throw it away. If it freezes up in the dispenser try adding some good stuff, running your car long enough for the rest to thaw out and hopefully that will lower the freezing temp for the old stuff you have.
__________________
03 Protege 5
MTX
02 Protege LX
2.0 MTX

jlanger is offline   Reply With Quote
Old December-7th-2002, 03:20 PM   #14
RA2OR
Protege Enthusiast
 
Join Date: Nov 2002
Location: Northern Ontario, Canada
Posts: 75
RA2OR is on a distinguished road
Rain X and Chattering blades

Thanks guys I'll have to give that rain x a try, I seen it in the stores and because it was a couple bucks more I stuck with the blue stuff. I generally haven't had problems before, maybe a bad batch. The chattering from the wiper blades probably accurs when your windshield is dry and just means its time to shut off the wipers. I also installed a set of wiper springs ($10 can) from a uap/napa store and they give more pressure to the wipers. They work a lot better at gettting rid of frost/ice than without them. I found the pressure in stock form was very low and the wipers couldn't get rid of anything.
__________________
2002 Protege 5
1999 CBR600F4

RA2OR
RA2OR is offline   Reply With Quote
Old December-7th-2002, 03:46 PM   #15
Evil Homer MP5
Evil P5 On The Loose!!!!
 
Evil Homer MP5's Avatar
 
Join Date: Feb 2002
Location: Mississauga, Canada
Posts: 432
Evil Homer MP5 is on a distinguished road
Re: Re: Windshield squirters freezing up!!

Quote:
Originally posted by Alex M


Mine have frozen temporarily but it seems to be more with ice covering the nozels rather than the fluid freezing up. They seem to work about 5 minutes later. Shrug.
They would start to work as the engine heats up and melts the ice around the nozzles.
__________________
2002 Midnight Blue Mazda Protege5
--------------------------
Tint, 35% all around
--------------------------
JVC KD-SH707
Inifinty 6-1/2" Component up front
Inifinty's 6-1/2" 2-way in rear
--------------------------
Evil Homer MP5 is offline   Reply With Quote
Old December-7th-2002, 03:46 PM
Mazda3Club
Mazda3




Paid Advertisement
 
 
 
Reply

Tags
blade, cold, deforst, dispenser, fluid, freeze, freezing, frozen, mazda, nozzle, squirt, squirters, washer, weather, windsheild, windshield, wiper, work


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




All times are GMT -5. The time now is 02:22 PM.


All content Copyright © 2012 by Internet Brands, Inc.